Sony WALKMAN MZ-R50 - Manual (Page 23)

23
-EN
Labeling recordings
You can label the MDs and tracks you
recorded with letters, numbers, and
marks. Each label can be made up of up to
200 characters, and each MD can hold up
to about 1700 characters.
1
To label a track , play the track you
want to label.
To label an MD, insert the recordable
MD you want to label. If an MD is
already inserted, press
p to stop.
2
Press TITLE/ENTER.
If you have selected a track in step 1
above, the recorder will play that
track repeatedly.
A cursor flashes in the display.
3
Use the vertical jog dial to select and
enter a character.
Moving recorded tracks
You can change the order of the recorded
tracks.
1
While playing the track you want to
move, keep pressing
( and press
TITLE/ENTER.
The recorder plays the selected track
repeatedly.
For the example above,
“MV003n003” appears in the
display.
2
Rotate the vertical jog dial to select
the new track position.
For the example above, rotate the jog
dial until “MV003n002” appears in
the display.
To cancel moving, press
p.
3
Press TITLE/ENTER again.
Moving is completed and the
recorder plays the moved track.
1 2 3 4
Before moving
Track A Track B Track C Track D
$
After
moving
Track A Track C Track B Track D
1 2 3 4
Move track C
from the third to
the second track.
TITLE/ENTER
Vertical jog dial
( p
TITLE/ENTER
(
VOLUME +/–
=/+
Vertical jog dial
END SEARCH
ERASE
p
z
You can also move the track by pressing the
jog dial in step 3.
Press
to enter. Rotate
to select.
Rotate the jog dial to select a
character, and press the jog dial to
enter the selected character. The
cursor shifts rightward and stands by
for the input of the next character.
continued