Samsung 4240 - Manual (Page 42)

42
ENG
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I ” or “Stereo”, depending on
the current transmission.
➣
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono .
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono .
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the side of the
television. If the mono sound comes out only from left
speaker, press the DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM DUAL- I/II
Regular broadcast
(Standard audio)
Bilingual or DUAL- I/II
Stereo
On-screen indication
Mono (Normal use)
NICAM Mono ↔ Mono
NICAM Stereo ↔ Mono
(Forced mono)
Mono
DUAL- I ↔ DUAL- II
Stereo ↔ Mono
(Forced mono)
NICAM DUAL- I →
NICAM DUAL- II →
Mono
NICAM
Stereo
A2
Stereo
Selecting the Sound Mode
(depending on the model)
BN68-00597A-01 4/2/04 6:38 PM Page 42