Samsung 4240 - Manual (Page 16)

16
ENG
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1 If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result: The message Plug & Play is displayed. It flickers for
a little while, and then the Language menu is
automatically displayed.
2 Select the appropriate language by pressing the † or … button.
3 Press the ENTER ( ) button to confirm your choice.
Result: The message Antenna Input Check is displayed.
4 Make sure that the antenna is connected to the TV, and then
press the ENTER (
) button.
Result: The Country menu is displayed.
5 Select your country by pressing the † or … button.
6 Press the ENTER ( ) button to confirm your choice.
Result: The Auto Store menu is displayed.
7 To start the search, press the ENTER ( ) button.
Result: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
When it has finished, the Clock Set menu is displayed.
➢
To stop the search before it has finished or return to normal
viewing, press the MENU (
) button.
➢
Press the ENTER ( ) button to set the clock.
8 Press the œ or √ button to move to the hour or minute.
Set the hour or minute by pressing the † or … button.
9 When it has finished, the message Enjoy Your Watching is
displayed, and then the channel which has been stored will be
activated.
Plug & Play Feature
Language
Move Enter
Austria
Belgium
Croatia
Denmark
Finland
France
Germany
▼ More
Country
Antenna Input Check
Plug & Play
Country
Press ENTER to Start Plug & Play
Start
Plug & Play
Enter Exit
Enjoy Your Watching
Press ENTER to start channel memory
40 MHz
0%
Start
Auto Store
Enter Stop
Channel store in process.
Storing.
57 MHz
1%
Auto Store
Enter Stop
Clock
Adjust Move Stop
Hour Min
01 00
Stop
Move Enter
BN68-00597A-01 4/2/04 6:38 PM Page 16