Band selection b, Fast search, User group b – Siemens Gigaset 200 User Manual

Page 95

Settings

s\C75 Aries\mx_us-en\LA\Aries

_Network.fm

Template:

X75, 140x105, Version 2.2;

VAR Languag

e: am; VAR issue date: 050718

left page (94)

of C75 Aries, w/o ptt, FUG, 143 mm, mx_us-en, A31008-H6970-A40-1-4A19

Create/change entry:

or select an existing entry,

then select a new service

provider in the list and

confirm.

Record new service provider (last en-

try in the list):

Furth.network

Select, enter the provider

data and save it.

Band selection

Select either GSM 900, GSM 1800 or

GSM 1900. Make sure that your ser-

vice provider supports the selected

band.

Fast search

When this feature is active, network

reconnection is speeded up (standby

time is reduced).

User group

Depending on your service provider,

you can create groups with this ser-

vice. These can have access to inter-

nal (company) information, for ex-

ample, or special rates apply. The

details can be clarified with your ser-

vice provider.
Active
Activate/deactivate feature. "User

group" must be deactivated for nor-

mal phone use.
Select group
You can select or add groups other

than preferred groups (see below).

Code numbers for the groups are ob-

tained from your service provider.
All outgoing
In addition to network control for a

user group, it is possible to set

whether outgoing calls outside the

group are permitted. If the function

is deactivated, only calls within the

group are permitted.
Pref. group
If activated, calls may only be made

within this standard user group

(depending on the network

configuration).

Additional information
If you are outside your home network, your

phone automatically dials another GSM

network.
If the signal strength of the preferred net-

work is inadequate when you switch on the

phone, the phone may register in a different

network. This can change when the tele-

phone is next switched on or if another net-

work is selected manually.