Siemens Gigaset 200 - Manual (Page 26)

25 Calling
© Siemens AG 2003, D:\Auftrag\Mobilepho
nes\C75 Aries\mx_us-en\LA\Aries
_Phone.fm
Template:
X75, 140x105, Version 2.2;
VAR Languag
e: am; VAR issue date: 050718
right page (25) of C75 Aries, w/o ptt, FUG, 143 mm, mx_us-en, A31008-H6970-A40-1-4A19
Incoming calls during a call
You may need to register for this ser-
vice with your service provider and
set your phone accordingly (p. 83).
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
the call. You have the following op-
tions:
• Accept the waiting call in addition
to the first
§Toggle§ Accept the waiting call,
putting the current call on
hold to do so.
Always proceed as above to switch
between the two calls.
• Decline the waiting call
§Reject§ Press.
Or
§Forward§ The waiting call is for-
warded, for example, to
the mailbox.
• Accept the waiting call and end the
current call
B
End the current call.
C
Accept new call.
Ending call(s)
B
Press the End key.
After the Return to held call? display,
you have the following choices:
§Yes§ You accept the call on
hold.
§No§ You end the 2nd call.
Conference
b
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the features described
may not be supported by your ser-
vice provider or may have to be spe-
cially enabled.
A connection has already been
established:
§Options§ Open menu and select
Hold . The current connec-
tion is maintained.
J
Now dial a new number.
When the new connec-
tion is established.
§Options§ … open menu and select
Conference . The held call is
joined.
Repeat procedure until all partici-
pants are linked together (up to
5 participants).