Call setup – Siemens Gigaset 200 User Manual

Page 84

Settings

s\C75 Aries\mx_us-en\LA\Aries

_CallSetup.fm

Template:

X75, 140x105, Version 2.2;

VAR Languag

e: am; VAR issue date: 050718

right page (83)

of C75 Aries, w/o ptt, FUG, 143 mm, mx_us-en, A31008-H6970-A40-1-4A19

Settings

Call setup

Select feature.

Hide ID

When you make a call, your phone

number can be displayed on the re-

cipient's display (depending on ser-

vice providers).
To suppress this display, you can en-

able the "Hide ID" mode for all sub-

sequent calls or just for the next call.

You may need to register separately

with your service provider for these

features.

Call waiting

If you are registered for this service,

you can check whether it is set and

you can activate/deactivate it.

Divert

You can specify the conditions under

which calls should be forwarded to

your mailbox or other numbers.
Status check
You can check the current forward-

ing status for all conditions. After a

short pause, the current situation is

transmitted by the network and

displayed.

Condition set.

Not set.

Display if status is un-

known (e.g. with a new

SIM card).

Clear all

All forwards previously set are

cleared.

Set up call forward (example)

The most common condition for call

forwarding is, for example:
Unanswered

Select

Unanswered

(Includes the conditions

Not reachable

No reply

Busy

, see below.)

Confirm.

Set

Select.

Confirm.

Select or enter the phone

number to which the calls

are to be forwarded.

§Mailbox§

Use existing mail-

box phone numbers, or

enter them if necessary.

§OK§

Confirm. After a short

pause, the setting is con-

firmed by the network.