Call screening b, Any key, Minute beep – Siemens Gigaset 200 User Manual

Page 85

Settings

s\C75 Aries\mx_us-en\LA\Aries

_CallSetup.fm

Template:

X75, 140x105, Version 2.2;

VAR Languag

e: am; VAR issue date: 050718

left page (84)

of C75 Aries, w/o ptt, FUG, 143 mm, mx_us-en, A31008-H6970-A40-1-4A19

All calls

All calls are forwarded.

Icon in the top line of the

display in standby mode.

Not reachable
Forwarding occurs if phone is

switched off or out of range.
No reply
A call is only forwarded after a delay

that is determined by the network.

The period can be set to a maximum

of 30 seconds in 5-second intervals.
Busy
Forwarding occurs if a call is in

progress. If

Call waiting

is activated

waiting tone during a call (page 25).
Receiving fax

Fax calls are forwarded to a number

with a fax connection.
Receiving data

Data calls are forwarded to a number

with a PC connection.

Call screening

Only calls from phone numbers that

are in the Phonebook/Addressbook

or in a group are signaled. Other calls

are only displayed.

Any key

Incoming calls can be accepted by

pressing any key (except for

Minute beep

During the call, you will hear a beep

after each minute as a reminder of

the time elapsed. The recipient does

not hear this beep.

Additional information
Note that the forward is stored in the net-

work and not in the phone (e.g. when the

SIM card is changed).
Reactivate forwarding
The last forwarding has been stored.

Proceed as with "Set forwarding". The

stored phone number is displayed.

Confirm number.