Getting started, Inserting the sim card/ battery, Inserting the sim card/battery – Siemens Gigaset 200 User Manual
Page 10
9
Getting started
© Siemens AG 2003, D:\Auftrag\Mobilephone
s\C75 Aries\mx_us-en\LA\Aries_Startup.fm
Template:
X75, 140x105, Version 2.2;
VAR Languag
e: am; VAR issue date: 050718
right page (9)
of C75 Aries, w/o ptt, FUG, 143 mm, mx_us-en, A31008-H6970-A40-1-4A19
Getting started
Inserting the SIM card/
battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Press and hold down the catch
1
,
then push cover towards the front
in the direction indicated by the
arrow
2
.
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then press the
SIM card slightly to push it in
3
(ensure that the chamfered corner
is in the correct position).
• Insert the battery sideways into
the phone
4
, then press it down-
wards
5
until it engages.
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
• Place the battery cover, then push
it towards the front
6
, until it
clicks into place.
Additional information
Please switch off your phone before re-
moving the battery!
1.8-V and 3-V SIM cards are supported.
Please contact your service provider if you
have an older card.
SIM card problems .....................page 120
1 2
3
4
5
6