Sanyo LNS-W10 - Manual (Page 13)

13
INITIAL PROGRAMMING
1. Press the MENU/OK key.
2. Press or to select “RING PATTERN” from the options,
3. Press MENU/OK to select.
4. Select the ring tone you wish to change (internal or external) by pressing or .
5. Press MENU/OK to enter the ring tone selection submenu.
6. Press or or number keys (0-9) to choose a ring tone sound (0-9).
7. Press MENU/OK to confirm settings. The external ring default setting is 0. The
internal ring default setting is 1.
Tip: To return to standby mode, press C repeatedly.
Handset ring volume level
To change the ring volume level while the handset is in standby mode:
1.
Press the MENU/OK key.
2. Press or to select “RING VOLUME” from the options.
3. Press MENU/OK to enter settings.
4. Press (to increase) (to decrease) volume. Or press number keys (0-6) to
select the desired ring level.
5. Press MENU/OK to confirm settings. The default setting is 4.
Tip: You can turn the ringer off by setting the volume level to zero, the icon
will be displayed on the handset display in standby mode.
Earpiece volume level
To change the volume level while the handset is in standby mode:
1.
Press the MENU/OK key.
2. Press or to select “HANDSET VOLUME” from the menu.
3. Press MENU/OK to enter settings.
4. Press (to increase) (to decrease) volume. Or press number keys (0-7) to
select the desired volume level.
5. Press MENU/OK to confirm settings. The default setting is 4.
Tip: To change the volume while a call is in progress, press or until you
reach the desired level.
Auto answer on / off
The auto-answer feature allows you to answer a telephone call as soon as you lift the
handset from the cradle in the base unit.
1.
Press the MENU/OK key.
2. Press or to find “AUTO ANSWER” from the options.
3. Press MENU/OK to enter settings.
4. Press or to select off or on.
5. Press MENU/OK to confirm your selection. The default setting is OFF.