Specifications, References – JVC TH-C9 User Manual
Page 47
References
44
7
Center unit (XV-THC9/XV-THC6/XV-THC3)
Audio section
Total Harmonic Distortion 0.02 %
NOTE: This value is measured at System cord CONNECTOR for
reference.
Digital input*
1
:
DIGITAL IN (DBS):
–21 dBm to –15 dBm
(OPTICAL)
(660 nm
E30 nm)
*
1
Corresponding to Linear PCM, Dolby Digital, and DTS Digital
Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)
Video section
Video System:
PAL/NTSC
Horizontal Resolution:
500 lines
Signal-to-Noise Ratio:
64 dB
Video output level
Composite:
1.0 V(p-p)/75
C
S-video-Y:
1.0 V(p-p)/75
C
S-video-C:
For PAL: 0.3 V(p-p)/75
C
For NTSC: 0.286 V(p-p)/75
C
Component-Y:
1.0 V(p-p)/75
C
Component-P
B
/P
R
:
0.7 V(p-p)/75
C
Video input sensitivity/Impedance (VCR IN)
Composite:
1.0 V(p-p)/75
C
S-video-Y:
1.0 V(p-p)/75
C
S-video-C:
For PAL: 0.3 V(p-p)/75
C
For NTSC: 0.286 V(p-p)/75
C
Tuner section
Tuning Range
FM:
87.5 MHz to 108.0 MHz
AM:
Except for Middle East
531 kHz to 1 710 kHz
(at 9 kHz channel spacing)
530 kHz to 1 710 kHz
(at 10 kHz channel spacing)
For Middle East
531 kHz to 1 602 kHz
(at 9 kHz channel spacing)
530 kHz to 1 600 kHz
(at 10 kHz channel spacing)
General
Power Requirements:
AC 110-240 V
, 50/60 Hz
Power Consumption:
19 W (at operation)
1.9 W (in standby mode)
Dimensions (W M H M D):
400 mm M 85 mm M 399 mm
Mass:
4.2 kg
7
Subwoofer (SP-PWC9)
Amplifier section
Front/Center/Surround:
140 W per channel, RMS at 4
C
at 1 kHz, with 10% total harmonic
distortion.
Subwoofer:
300 W, RMS at 4
C at 40 Hz, with
10% total harmonic distortion.
Speaker section
Speaker unit:
25 cm Bass-reflex
Power Handling Capacity: 300 W
Impedance:
4
C
Frequency Range:
25 Hz to 200 Hz
General
Power Requirements:
Except for Australia
AC 110 V/ AC 127 V/
AC 220-240 V
, 50/60 Hz
For Australia only
AC 240 V
, 50 Hz
Power Consumption:
110 W (at operation)
0 W (in standby mode)
Dimensions (W M H M D):
264 mm M 481 mm M 459 mm
Mass:
17.6 kg
7
Subwoofer (SP-PWC6/SP-PWC3)
Amplifier section
Front:
140W per channel, RMS at 4
C at
1 kHz, with 10% total harmonic
distortion.
Center/Surround:
130W per channel, RMS at 4
C at
1 kHz, with 10% total harmonic
distortion.
Subwoofer:
140 W, RMS at 4
C at 100 Hz, with
10% total harmonic distortion.
Speaker section
Speaker unit:
16 cm Bass-reflex
Power Handling Capacity: 140 W
Impedance:
4
C
Frequency Range:
30 Hz to 200 Hz
General
Power Requirements:
Except for Australia
AC 110 V/ AC 127 V/
AC 220-240 V
, 50/60 Hz
For Australia only
AC 240 V
, 50 Hz
Power Consumption:
135 W (at operation)
0 W (in standby mode)
Dimensions (W M H M D):
169 mm M 411 mm M 459 mm
Mass:
11.3 kg
Specifications
TH-C3C6C7C9[AUWUSUNUGUX].book Page 44 Monday, April 25, 2005 8:56 PM