beautypg.com

Basic operations, Turning the system on/off, Press audio – JVC TH-C9 User Manual

Page 20: Press

background image

17

Basic operations

IMPORTANT
Before using the remote control for the following

operation;

• Set the remote control mode selector to AUDIO.

On the remote control:

Press

AUDIO.

On the center unit:

Press .

When DVD is selected as the source (

A pg. 18), the following

messages will appear on the TV screen.

NOTE
• The STANDBY lamp turns on when the power is turned off and turns

off when the power is turned on.

• The power supply to the subwoofer is linked to the center unit. The

POWER ON lamp on the subwoofer lights green when the power is
turned on.

• A small amount of the power is consumed even when the power is

turned off (center unit only). This is called standby mode and the
STANDBY lamp lights in this mode. Unplug the power cord from the
AC outlet to turn the power off completely.

• You can also turn on the system by pressing the following buttons;

One of 0 buttons on the center unit

One of the source selecting buttons on the remote control

One of the DISC (1-5) 3 buttons or 3 on the center unit
You can use the same buttons on the remote control.

The buttons on the remote control are used to explain most of the
operations in this manual. You can use the buttons on the center
unit same as on the remote control for operations unless
otherwise noted.

The buttons described below are used on
pages 17 to 20.

FRONT L

FRONT R

LEVEL

S.WFR

SMART

S.SETUP

CENTER

DIMMER

SLEEP

TREBLE

BASS

SURR. R

SURR. L

LEVEL

BASS/

Source

selecting

buttons

Remote control
mode selector

Cursor

(3/2/Y/5)/

ENTER

Speaker

buttons

DISC 5

DISC 4

DISC 3

DISC 2

DISC 1

SOURCE

Turning the system on/off

• “OPEN”/“CLOSE”:

Appears when opening or closing the disc tray.

• “NOW READING”:

Appears when the system is reading the disc information.

• “REGION CODE ERROR!”:

Appears when the Region Code of the DVD VIDEO does not
match the code the system supports. The disc cannot be
played back.

• “NO DISC”:

Appears when no disc is loaded.

• “CANNOT PLAY THIS DISC”:

Appears when unplayable disc is loaded.

TH-C3C6C7C9[AUWUSUNUGUX].book Page 17 Monday, April 25, 2005 8:56 PM