JVC 4ch Network Encoder VN-E4 - Manual (Page 54)

54
5. API for Acquiring/Changing Parameters of VN-E4 _
5.11. Access Restrictions
Example /api/param?network.access_control(api).host(1)=10.0.0.0/24
It is also possible to set using FQDN instead of IP address. Set as follows if the setting is to be left blank.
Example /api/param?network.access_control(api).host(1)=%00
Details set by this API are the same as those set by the "Access Restriction" item of "Client Address" at the
bottom of the Access Restrictions page.
Allowed user admin
Acquiring Deny/Allow Setting of Audio Sender Restrictions from VN-E4
Format /api/param?network.access_control(stream_in).logic
Example of Response network.access_control(stream_in).logic=deny&200 OK
Interpretation Acquire the deny/allow setting of audio sender restrictions. Either deny or allow will be returned. This API
acquires the same details as the "Access Restriction" item of "Source Address of Audio Sender" at the bottom
of the Access Restrictions page.
Allowed users admin, operator
Setting Audio Sender Restriction to Deny/Allow for VN-E4
Format /api/param?network.access_control(stream_in).logic=data
Example /api/param?network.access_control(stream_in).logic=deny
Example of Response network.access_control(stream_in).logic&200 OK
Interpretation Change the deny/allow setting of audio sender restrictions. Specify as deny or allow. This API acquires the
same details as the "Access Restriction" item of "Source Address of Audio Sender" at the bottom of the Access
Restrictions page.
Allowed user admin
Acquiring IP Address Setting of Restricted Audio Sender from VN-E4
Format /api/param?network.access_control(stream_in).host(Number)
Example When acquiring the first IP address
/api/param?network.access_control(stream_in).host(1)
Example of Response network.access_control(stream_in).host(1)=10.0.0.100&200 OK
Interpretation Acquire the IP address setting of the restricted audio sender. Setting is possible up to 10 items. Specify a value
between 1 to 10 for the number. The following will be returned if subnet mask is specified at the same time.
Example of Response 2 network.access_control(stream_in).host(1)=10.0.0.0/24&200 OK
The above example indicates that the range is set as between 10.0.0.0 to 10.0.0.255.
This API acquires the same details as the "Access Restriction" item of "Source Address of Audio Sender" at
the bottom of the Access Restrictions page.
Allowed users admin, operator
Setting IP Address of Audio Sender Restrictions for VN-E4
Format /api/param?network.access_control(stream_in).host(Number)=data
Example When setting the first IP address
/api/param?network.access_control(stream_in).host(1)=10.0.0.100
Example of Response network.access_control(stream_in).host(1)&200 OK