Acquiring ftp server address setting from vn-e4, Setting ftp server address for vn-e4, Acquiring ftp server directory setting from vn-e4 – JVC 4ch Network Encoder VN-E4 User Manual
Page 34: Setting ftp server directory for vn-e4, Api for acquiring/changing parameters of vn-e4

34
5. API for Acquiring/Changing Parameters of VN-E4 _
5.5. Alarm Environment Setting
Acquiring FTP Server Address Setting from VN-E4
Format
/api/param?application.ftp.host
Example of Response
application.ftp.host=10.0.0.200&200 OK
Response example
when setting field is
left blank
application.ftp.host=&200 OK
Interpretation
Acquire the FTP server address setting used for FTP transmission via alarm.
Allowed users
admin, operator, user
Setting FTP Server Address for VN-E4
Format
/api/param?application.ftp.host=data
Example
/api/param?application.ftp.host=10.0.0.200
Example of Response
application.ftp.host&200 OK
Interpretation
Change the FTP server address setting used for FTP transmission via alarm. Specify the IP address or FQDN.
The maximum FQDN size is 60 bytes. Specify as 0.0.0.0 when the FTP server is not set. It is also possible to
leave the setting field blank as follows.
/api/param?application.ftp.path=%00
Allowed users
admin, operator
Acquiring FTP Server Directory Setting from VN-E4
Format
/api/param?application.ftp.path
Example of Response
application.ftp.path=subdir1&200 OK
Response example
when setting field is
left blank
application.ftp.path=&200 OK
Interpretation
Acquire the FTP server directory setting used for FTP transmission via alarm.
Allowed users
admin, operator, user
Setting FTP Server Directory for VN-E4
Format
/api/param?application.ftp.path=data
Example
/api/param?application.ftp.path=subdir1
Example of Response
application.ftp.path&200 OK
Interpretation
Change the FTP server directory setting used for FTP transmission via alarm. It is possible to set FTP
transmission to a directory under the FTP server home directory by specifying that directory name. Use / to
segment the directory. The maximum directory name size is 60 bytes.
Example
/api/param?application.ftp.path=subdir1/subdir2
By leaving the setting blank as follows, FTP transmission will be set to the FTP server home directory.
/api/param?application.ftp.path=%00
Allowed users
admin, operator