JVC GET0635-003A - Manual (Page 62)

2
• The fuse blows.
] Are the red and black leads connected correctly?
• Power cannot be turned on.
] Is the yellow lead connected?
• No sound from the speakers.
] Is the speaker output lead short-circuited?
• “PROTECT” appears on the display and no operation can be done.
] Is the speaker output lead
short-circuited or touches the chassis of the car/head unit? ; Have you reset your unit?
• Sound is distorted.
] Is the speaker output lead grounded? ; Are the “–” terminals of L and R speakers
grounded in common?
• Noise interfere with sounds.
] Is the rear ground terminal connected to the car’s chassis using shorter
and thicker cords?
• This unit becomes hot.
] Is the speaker output lead grounded? ; Are the “–” terminals of L and R
speakers grounded in common?
• This unit does not work at all.
] Have you reset your unit?
• ]
• ]
• ]
• PROTECT
]
• ]
• ]
• ]
• ]
TROUBLESHOOTING /
Signal cord / * 1
Y-connector / * 1
Remote lead /
To the blue (white stripe) lead of
the unit /
Rear speakers or subwoofer (Make the setting accordingly,
see page 15 of the INSTRUCTIONS.) /
Rear ground terminal /
15 A fuse /
* 1 Not supplied for this unit.
* 2 Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated
with paint.
* 3 Before checking the operation of this unit prior to installation, this lead must be connected; otherwise,
the power cannot be turned on.
* 1
* 2
* 3
Reset the unit. /
JVC Amplifier /
Connecting the external amplifier or subwoofer /
Ignition switch /
Black /
Fuse block /
Blue (white stripe) /
Red /
Yellow / * 3
To the metallic body or chassis of the car /
To an accessory terminal /
To a live terminal (constant 12 V) /
To the automatic antenna if any (250 mA max.) /
White /
White (black stripe) /
Gray /
Gray (black stripe) /
Green /
Green (black stripe) /
Purple /
Purple (black stripe) /
Front speaker (left) /
Front speaker (right) /
Rear speaker (left) /
Rear speaker (right) / To the remote lead of other equipment (200 mA max.) /
Blue /
PRECAUTIONS on power supply and speaker connections
• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be
seriously damaged.
• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in
your car.
•
•
ELECTRICAL CONNECTIONS /
IMPORTANT: A custom wiring harness (separately purchased) which is suitable for your car is
recommanded for connection between the unit and your car.
• Consult your JVC car audio dealer or a company supplying kits for details.
•
Antenna input /
Steering wheel remote input /
Install_KD-R516_010A_1.indd 2 Install_KD-R516_010A_1.indd 2 11/23/09 3:31:02 PM 11/23/09 3:31:02 PM