JBL EVOi.net - Manual (Page 7)

EVOi.net
5
F E A T U R E S
6 AUTO EQ SETTING
AUTO EQ SETTING includes two setup buttons, MAIN
SETUP 1&2 and AUX SETUP 3&4, and associated LED
indicators for state confirmation. For detailed operation,
refer to See Using The Auto EQ Setting on page 11.
After the Auto EQ filters have been set, use AEQ ON to
turn Auto EQ on or off. An associated LED indicator will
confirm your selection.
7 DELAY SETTING
Press DELAY SETTING to initiate delay setup on
auxiliary outputs, AUX OUT 3A (left) and AUX OUT 4B
(right). For detailed operation, refer to Delay Setting on
page 14.
The orange SETUP LED will flash during setup and the
green DELAY SET LED will turn on once the delay time
has been set on auxiliary outputs, AUX OUT 3A (left) and
AUX OUT 4B (right).
8 POWER Indicator
A green LED indicates EVOi.net is being powered.
9 RS232 Connector
Use this 8-pin mini DIN connector to connect the EVOi.net
to a PC’s RS232 port.