Jensen UV8 User Manual
Page 18
14
UV8
Recalling a Station
1.
Select a band (if needed).
2.
Touch an on-screen preset button (6) to select the
corresponding stored station.
Auto Store (AS)
To select six strong stations and store them in the current
band:
1.
Select a band (if needed).
2.
Press the AS/PS button (3) on the control panel or touch
AS
(16) on the screen for 2 seconds to activate the Auto
Store function.
The new stations replace stations already stored in that band.
Preview Scan (PS)
To scan the AM or FM band for a preview of available stations
in your particular area, touch the PS button (20). Touch again
to stop preview scan.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a
strong local radio signal are played. To activate the Local
function in AM/FM tuner mode, press and hold the VOL
(rotary encoder) button (5) on the front panel. Press and hold
the rotary encoder again to turn Local off. When the Local
function is active, the LOC indicator at the top of the screen is
illuminated.
P1
87.5
MHz
P2
90.1
MHz
P3
98.1
MHz
P4
106.1
MHz
P5
107.9
MHz
P6
102.9
MHz