JVC KD-AR600 - Manual (Page 37)

37
ENGLISH
EXTERNAL COMPONENT OPERATIONS
(0nly for KD-AR600)
Playing an external component
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See “To select the external component to
use—EXT IN” on page 28.
1
Select the external component
(LINE IN).
• If “LINE IN”* does not appear on the display,
see page 28 and select the external input
(“LINE IN”).
* Displayed only when one of the following
sources is selected—FM, AM, and CD.
Note on One-Touch Operation:
When you press CD CD-CH, the power automatically
comes on. You do not have to press
to turn
on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 23 and 24.)
To use the JVC SIRIUS Radio, refer to the
SIRIUS Radio Setup Manual (separate volume).
7
CD LINE IN*
EN37-37KD-AR600_500[J]-6 30/9/03, 16*15 37