JVC KD-AR600 - Manual (Page 18)

18
ENGLISH
Refer also to “CD OPERATIONS” on pages
13 to 16.
Playing a disc
1
Open the control panel.
Note on One-Touch Operation:
When a disc is already in the loading slot,
pressing CD turns on the unit and starts
playback automatically.
2
Insert a disc into the loading slot.
The unit turns on,
draws the disc and
starts playback
automatically.
3
Close the control panel by hand.
All files will be played repeatedly until you
stop playback.
MP3/WMA OPERATIONS
* WMA or MP3 indicator lights up depending on the
first detected file.
Notes:
• MP3/WMA discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appears. (See also page 19.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
The display changes to show the following:
Ex.: When the disc contains 19 folders and
144 MP3/WMA files
WMA or MP3 indicator*
CD indicator
Current source
indication
Total file
number Total folder
number
7
EN17-22KD-AR600_500[J]-6 30/9/03, 16*13 18