Using the remote control – JVC LET0089-001A User Manual
Page 12
Page 9
English
BASIC OPERATIONS
Using the SHIFT button on the remote
control unit
You can control other functions with the remote control, simply by
holding down the SHIFT button while pressing another button. Some
of these functions are useful for Karaoke and Video CD playing, others
for controlling the TV.
Using the remote control
7
7
7
7
7
SHIFT button functions for Karaoke and Video CD playing
SHIFT + TV PROG –
=
KEY CONTROL (
)
SHIFT + TV PROG +
=
KEY CONTROL (#)
7
7
7
7
7
SHIFT button functions to control the TV
SHIFT + VCD POWER
=
Turns the TV on and off
SHIFT + 1
=
TV Channel 1
SHIFT + 2
=
TV Channel 2
SHIFT + 3
=
TV Channel 3
SHIFT + 4
=
TV Channel 4
SHIFT + 5
=
TV Channel 5
SHIFT + 6
=
TV Channel 6
SHIFT + 7
=
TV Channel 7
SHIFT + 8
=
TV Channel 8
SHIFT + 9
=
TV Channel 9
SHIFT + 10
=
TV Channel 0*
Note
•
The asterisk * indicates that these operations do not work for some
manufacturers’ television sets.
Presetting the remote control to operate
your own TV
You can use the Player’s remote control unit to control some functions
on your TV set (e.g., turning the TV on and off, adjusting volume, or
selecting channels). First, though, you must preset the remote control
to make it compatible with your TV.
Operation
1. Check the Preset Code Table (page 10) to determine the two-
digit brand code number for your TV.
2. While holding down the TV/VIDEO button on the remote con-
trol, press the Number keys to insert the two-digit brand code
number. (For example, if the code number is "28", press
Number key 2, then 8. If the first digit is a "0", press 10. Thus,
if the code number is "09", press Number key 10, then 9. If the
code number is "10", press Number key 1, then 10. If it is "20",
press Number key 2, then 10.)
Notes
•
Before the remote control unit leaves the factory, the brand
code number is set as No. 01 (JVC).
•
Depending on your television set’s age and other factors,
brand code numbers may be different from those shown in the
table. In such a case, try out other codes until you find one that
corresponds to your television.
3. While still holding down the TV/VIDEO button, press the STOP
button on the remote control.
+
STOP
TV/VIDEO
4. If the code number is correct, the TV will turn off. Repeat the
procedure from the beginning if you weren’t successful the
first time.
SHIFT
XL-MV558GD
97.8.4, 9:39
9