JVC AV-48WP30 - Manual (Page 29)

Plug In Menu
The AUTO TUNER SETUP feature automatically scans through all the channels your television
can receive and memorizes only the channels with clear, active signals. This means when you
scan through the channels, you will receive only channels with good signals, no more annoying
static or dead air.
Press the M ENU button
›‚ To AUTO TUNER SETUP
¥Š
To operate
¥Š
To choose CABLE or AIR
›‚ To move to START
¥Š
To start Auto Tuner Setup
The television will now scan through all the channels it can receive, memorizing those with
clear, active signals. Programming will take several minutes. When it is finished the following
message will appear:
You may add or delete channels from the Auto Tuner scan. If there are channels you do not
wish to receive or if the Auto Tuner missed a channel which may have not been broadcasting
or had a weak signal, you can modify the scan using the CHANNEL SUMMARY feature. For
information on CHANNEL SUMMARY, see page 32.
48
NOW
PROGRAMMING !
PROGRAMMING OVER!
29
AUTO TUNER SETUP