TM-H1950CG
1-9
No.51961
ENGLISH
EXIT
CHROMA
MENU
PHASE
BRIGHT
CONTRAST
VOLUME/SELECT
DISPLAY AND SELECTIONS IN THE MENU> MODE (SETTING)
• PICTURE SUB ADJ.
• WHITE BALANCE
• REMOTE SYSTEM
• H. POSITION
• CONTROL LOCK
• INPUT REMOTE
• V. POSITION
• STATUS DISPLAY
You can set the following set-up menu items.
1. While pressing the MENU button, press the
CHROMA/PHASE button.
The screen is displayed.
* The on-screen display goes off automatically after about five
minutes with operation performed.
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
A selection mark (
4
) is put next to the selected item.
3. Press the VOLUME/SELECT buttons to set.
●
For WHITE BALANCE items, select the CUT OFF or DRIVE
setting screen, then select the function display for adjustment.
●
Press the EXIT (MENU) button to return to the MENU> screen.
Notes:
screen
1
Selection mark (
4
): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
ᮢ
Forward the menu item.
ᮡ
Reverse the menu item.
–
Lower the adjustment
value. (to the minimum)
+
Raise the adjustment
value. (to the maximum)
4
Forward the setting value.
1
Reverse the setting value.
EXIT
Exit the
