Acompb, Pp27 – JVC DLA-RS1 User Manual
Page 27

27
Preparation
B
Settings
Troubleshootin
O
Getting Started
ENGLISH
z
AContrastB, ABrightnessB, AColorB, ASharpnessB, ADNRB, AColor Temp.B, AGammaB and AOffsetB are registered in AImage
Profile
B.
z
The display position value varies with the input signal.
z
This adjustment is available only for analog input signals.
z
This setting is available only when projecting the HDMI input.
z
Masking is available only when high definition images are input.
z
This setting is available only when projecting the component video input.
Setup>Profile Memory
L
Profile Memory
Registers or deletes image profiles.
Save User1
Registers image profile in
AUser1B.
Save User2
Registers image profile in
AUser2B.
Save User3
Registers image profile in
AUser3B.
Clear User1
Returns image profile in
AUser1B to factory setting (natural).
Clear User2
Returns image profile in
AUser2B to factory setting (natural).
Clear User3
Returns image profile in
AUser3B to factory setting (natural).
Reset Cinema
Returns image profile in
ACinemaB to factory setting.
Reset Natural
Returns image profile in
ANaturalB to factory setting.
Reset Dynamic
Returns image profile in
ADynamicB to factory setting.
Setup>Picture Position
M
Picture Position
Adjusts the horizontal/vertical position of the projected image.
Setup>HDMI Input Level
N
HDMI Input Level
Configures the input level setting of the HDMI input terminal.
Standard
For normal circumstances, select this setting.
Enhanced
Select this setting when the black-and-white of the projected image is unclear when
RGB video signals are input from DVI devices.
Setup>Mask
O
Mask
Masks (Hides) the outer area of the projected image.
2.5%
Masks 2.5 % of the screen.
5%
Masks 5 % of the screen.
Off
No masking.
Video>COMP
P
COMP
Configures the input signals of the component video input terminals.
Y Pb/Cb Pr/Cr
Select this when component video signals are input.
RGB
Select this when RGB video signals are input.
SCART
Select this when RGB video signals and sync signals are input from SCART plug for
European market.
DLA-RS1_EN.book Page 27 Wednesday, January 24, 2007 9:23 AM