JVC VN-V225U series User Manual
Page 77
77
(
TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only.
Ⅵ Title Bar
For setting display items on the viewer screen.
For the MPEG4 Viewer, characters are displayed in the title bar of the
window.
A
Camera ID
Select
AOnB to display [Camera ID].
[Camera ID] can be specified on the [Basic Settings1] or [Camera] page
of the camera.
(
B
Position Title
(
TX)
Selecting
AOnB displays the Position Title.
C
Time
Select
AOnB to display the time.
D
Format
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH,
MM, and SS denote hour, minute and second respectively. mm is
equivalent to 1/100 seconds.
Ⅵ Stream Settings
For specifying settings for receiving MPEG4 stream.
A
Stream
For selecting the protocol when the viewer acquires data from the
camera.
When
AHTTPB is selected, lost packets are recovered via resending.
Camera may be monitored using multiple viewers when
AMulticastB is selected.
When playing back via multicast., start multicast sending on the
[Streaming] page of the camera unit.
Note:
● When the built-in viewer is launched with AMulticastB specified, a
Windows firewall warning may appear. In this case, select
AunblockB
and proceed.
● If AblockB is selected, the Windows firewall will block the multicast
stream and playback of multicast by the viewer will fail.
B
HTTP Port
You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the [Protocol]
page of the camera. (
C
Multicast IP
Address
You can change the multicast IP address.
The default address is 225.0.2.1.
D
Multicast Port
You can change the multicast port number.
The default port number setting is 59152.
This is enabled when [Start] is selected for the [MPEG4 Control] item on
the [Streaming] page.
Specify the same value as the parameter that is set on the [Streaming]
page of the camera. (