JVC VN-V225U series - Manual (Page 51)

51
Note:
● Note that when AallowB is selected and all IP address fields are left blank, JPEG / MPEG4 / Audio
acquisition by all IP addresses will be denied.
Restrictions are not imposed on access to the Web Settings page.
Additionally, Camera will also deny access when instructions for transmission to the specified IP
address are sent via API.
Memo:
● To specify a specific IP address range, enter a combination of the IP address and subnet mask in
the [IP Address] field.
● Define the subnet mask using a length between 8 to 30 bits.
For example, a range between 192.168.0.0 to 192.168.0.255 is denoted as 192.168.0.0/24 ([IP
Address]/[bit length of subnet mask]).
Destination Address Restrictions may be imposed on clients accessing the camera using the IP
address.
A Access
Restrictions When AdenyB is selected, acquisition of JPEG / MPEG4 / Audio via the IP
address specified for the [IP Address] item will be denied. Restrictions are
not imposed on access to the Web Settings page.
When AallowB is selected, acquisition of JPEG / MPEG4 / Audio via the IP
address specified for the [IP Address] item will be permitted. Restrictions
are not imposed on access to the Web Settings page.
B IP Address When a multicast address is specified and AdenyB is selected, camera will
deny transmission to this multicast address.
When a multicast address is specified and AallowB is selected, camera will
only accept transmission to this multicast address and deny transmission
to multicast addresses that are not stated in the [IP Address] field.