JVC VN-V225U series User Manual
Page 73
73
A
A
UTO
F
UNCTION
Start
: Starts the Auto Patrol operation.
Stop
: Stops the Auto Patrol operation that is currently running.
B
Preset
Position
For selecting a Preset Position, or move to the selected Position if that Position
has already been registered.
[Set values : HOME , 1 to 19]
C
Pan/Tilt/
Zoom
Ⅵ Pan/Tilt operation
Click the arrow buttons to move the display area in the direction indicated by
the arrow. Release the button to stop moving the area.
Click the [H] button to move to the home position.
Ⅵ Zoom operation
Use this function to perform digital zoom on the display area.
[ + ]
: Zooms toward the tele end, and display of the object is enlarged.
[ - ]
: Zooms toward the wide end, and display of the object becomes
smaller.
Ⅵ Ratio to Full Area
Shows current ratio to full area.
Memo:
● You can restrict the magnification of the object using the [+] button by
altering the [Zoom Limit] settings.(
D
Speed
For configuring the operation speed settings.
Pan/Tilt
: For configuring the operation speed settings of the
APan/TiltB control
button. The larger the value, the higher the operation speed.
[Set values : 1 to 8]
Zoom
: For configuring the operation speed settings of the
AZoomB control
button. The larger the value, the higher the operation speed.
[Set values : 1 to 4]