JVC CA-WMD90R - Manual (Page 56)

– 51 –
Using Daily Timer
With Daily Timer, you can wake up to your favorite music
or radio program.
• You can set Daily Timer whether the unit is turned on or
off.
How Daily Timer actually works
The unit automatically turns on, and starts playing the
specified source when the timer-on time comes. Then,
when the timer-off time comes, the unit automatically turns
off (stands by).
Daily Timer works every day, and the timer settings remain
stored in memory until you reset them or disconnect the AC
power cord.
1
Press CLOCK/TIMER repeatedly to select Daily
Timer setting mode.
• Each time you press the button, the timer mode
changes as follows:
Turns on/off Daily Timer.
Sets Daily Timer.
Turns on/off Recording
Timer 1.
Sets Recording Timer 1.
Turns on/off Recording
Timer 2.
Sets Recording Timer 2.
Turns on/off Recording
Timer 3.
Sets Recording Timer 3.
Sets the clock (see page
11).
2
Rotate the right jog dial to set the hour of the timer-
on time, then press SET.
3
Rotate the right jog dial to set the minute of the
timer-on time, then press SET.
4
Rotate the right jog dial to set the hour of the timer-
off time, then press SET.
5
Rotate the right jog dial to set the minute of the
timer-off time, then press SET.
6
Rotate the right jog dial to set the source, then press
SET.
FM: Tunes into the last received FM station.
AM: Tunes into the last received AM (MW/LW)
station.
CD: Plays a CD. Prepare a CD, then go to step 7.
MD A: Plays an MD in MD deck A. Prepare an MD.
MD B: Plays an MD in MD deck B. Prepare an MD,
then go to step 7.
AUX*: Selects “AUX” as the source. Make the
external equipment ready for playback.
TAPE*: Selects “TAPE” as the source. Make the
cassette deck ready for playback.
* To operate these equipment with the Daily Timer,
they also need to have the timer function.
7
If you have selected CD as the source in the above
step, select the CD number.
1) Rotate the right jog dial to select the CD number
(CD 1 to CD 3).
2) Press SET.
If you have selected MD B as the source in the above
step, select an MD on MD deck B.
1) Rotate the right jog dial to select the MD number
(MD 1 to MD 3).
2) Press SET.
8
Rotate the right jog dial to set the volume level, then
press SET.
The DAILY indicator stops flashing and remains lit.
The settings you have done are shown in the main
display in sequence.
• You can select the volume level from among 4
settings.
A : Volume level will be set to 5 (low).
B : Volume level will be set to 12 (middle).
C : Volume level will be set to 20 (loud).
– : Volume level will be set the previous level when
the unit is turned off.
9
Press to turn off the unit (on standby) if you
have set the timer with the unit turned on.
DAILY on/off
DAILY setting mode
REC1 on/off
REC1 setting mode
REC2 on/off
REC2 setting mode
REC3 on/off
REC3 setting mode
Clock setting mode
Timer/Clock setting
mode is canceled
FM AM CD
MD A MD B TAPE AUX
EN49-58.CA-WMD90R[E]/f 99.4.1, 6:01 PM 51