JVC CA-WMD90R User Manual
Page 31
– 26 –
English
Programming the Playing Order of the
Tracks — Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
When using MD deck A:
1
Insert an MD.
• If the current playing source is not the MD deck,
press
# / 8 on MD deck A (or MD A 6 on the
remote control), then
7 for the MD deck A (or 7 on
the remote control) before going to the next step.
2
Press PLAY MODE so that “MD PROGRAM”
appears in the main display.
• Each time you press the button, play mode changes
as follows:
3
Select the track.
On the unit:
Rotate right jog dial to select the track number, then
press SET.
On the remote control:
Press the number buttons.
• For how to use the number buttons, see “To go to
another track directly using the number buttons” to
the left.
4
Repeat step 3 to program other tracks you want.
5
Press
# / 8 on the MD deck A (or MD A 6 on the
remote control).
The tracks are played in the order you have programed.
To stop during play, press
7 on MD deck A.
To exit from program play mode, press PLAY MODE
once or twice, before or after play, so that the unit enters
another playback mode (Random play or Continuous play
mode).
Continued
MD PROGRAM
Canceled
(Continuous play)
MD RANDOM
Step No.
Ex. Track No. 8 is selected
Track No.
To check the program contents
Before playing, you can check the program contents by
pressing
4 1 or ¢ ¡ on the remote control.
•
¢ ¡ : Shows the programed tracks in the programed
order.
•
4 1 : Shows them in the reverse order.
To modify the program
Before playing, you can erase the last programed track by
pressing CANCEL. Each time you press the button, the last
programed track is erased from the program.
• Pressing
0 for MD deck A, the entire program is erased.
To add tracks in the program before you start play,
simply select track numbers you want to add.
If you try to program a 33rd step
“MD FULL” will appear on the display.
If your entry is ignored
You have tried to program a track that does not exist on the MD
(for example, selecting track 14 on an MD that only has 12 tracks).
Such entries are ignored.
EN23-37.CA-WMD90R[E]/f
99.4.1, 6:00 PM
26