JVC DR-MV2SEU - Manual (Page 53)

53
Editing
EN
Protecting Titles
To prevent the accidental editing or erasing of the
titles, you can protect them in the original menu.
Press [DVD] first.
1
In stop mode, press [SET UP].
“Easy Setting Menu” or “Advanced Setting Menu”
will appear.
2
Select “Disc” using [Cursor U / D],
then press [ENTER].
3
Select “Original” using
[Cursor
U / D], then press [ENTER].
4
Select the desired title using
[Cursor
U / D / L / P], then press
[ENTER].
5
Select “Protect” using
[Cursor
U / D], then press [ENTER].
6 Press [ENTER] again.
7 Press [SET UP].
Writing on the disc starts.
It may take a while to write the data on a disc.
To protect a whole disc (DVD-RW VR mode
only):
Select “Disc Protect” from the Disc menu, then
select “Yes.” Refer to “Setting a Disc to Protect”
on page 35.
Hint
• The protected title is marked with a key icon in the
original list.
Releasing Titles from
Protecting
You can cancel the title protection feature after it is
applied.
Press [DVD] first.
1
Follow steps 1 to 4 in
“
Protecting Titles.”
2 Press [ENTER].
3
Press [ENTER] again.
The key icon will disappear from the title in the
original list.
4
Press [SET UP].
Writing on the disc starts.
It may take a while to write the data on a disc.
Original
DVD-RW DVD-RW
VR
Original
15/04 19:00 P12 XP
Title Delete 3
Protect
0:00:59
15/04 19:00 P12 XP
3
0:00:59
Original Protect
OFF ON
-
Original
DVD-RW DVD-RW
VR
Original
3
15/04 19:00 P12 XP
3
0:00:59
ON OFF
Original Protect -
E9770ED_EN.book Page 53 Wednesday, August 3, 2005 6:35 PM