beautypg.com

Settings for external equipment, Connection to external equipment – JVC DR-MV2SEU User Manual

Page 33

background image

33

Reco

rdin

g

EN

If programming has been made at the end of the
programming (PROG. 1) currently being recorded:
• The timer programming set first (PROG. 2) has

priority. PROG. 3 will not be recorded.

If the recording time is partially overlapped:
• The timer programming with the earlier start time

(PROG. 2) has priority. PROG. 1 will start after
PROG. 2 recording is complete.

If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not

recorded.

Note for DVD recording
• If the recording time of two programmes overlap, or

the End time of a programme and the Start time of
another is same, the first 30 seconds (at the most)
of the subsequent programme are cut off.

If the End time of the programme currently being
recorded and the Start time of the subsequent
programme are same:
• If PROG. 1 is a DVD recorded programme, the

beginning of PROG. 2 may be cut off.

* If the cut off time exceeds 1 minute, the error

number “E40” will appear in the timer programming
list.

Settings for External Equipment

Connection to External Equipment

Connect the external equipment using either the input
jacks, AV1, AV2 (Rear) or AV3 (Front). However, for
AV3 jacks, you have to select S-VIDEO input or
VIDEO input jacks depending on the connected
devices.
Use commercially available Scart, S-Video or Video
cable and an Audio cable for this connection.

1

In stop mode, press [SET UP].

2

Select “Advanced Setting Menu”
using [Cursor

U / D], then press

[ENTER].

If it has already appeared, proceed to step 3.

3

Select “Select Video” using
[Cursor

U / D], then press [ENTER].

4

Press [ENTER].

5

Select the input jack type to be used
using [Cursor

U / D], then press

[ENTER].

• If you want to use VIDEO input jack (Composite),

select “Video In.”

• If you want to use S-VIDEO input jack, select

“S-Video In.”

6

Press [SET UP] to exit.

PROG. 1

PROG. 2

PROG. 1

PROG. 2

PROG. 3

PROG. 2
recording
will start
after
PROG. 1
recording is
completed.

Actual

recording

Additional 30 seconds (at the most) are cut off.

PROG. 1

PROG. 2

PROG. 2

PROG. 1

Additional 30 seconds (at the most) are cut off.

Actual

recording

PROG. 1

PROG. 2

PROG. 2

Actual

recording

PROG. 1

PROG. 2

PROG. 2

PROG. 1

Actual

recording

The first 30 seconds

(at the most) are cut off.*

DVD-RW

DVD-RW

Video

DVD-RW

DVD-RW

VR

DVD-R

DVD-R

VCR

VCR

VCR

AV3 (Front)

S-Video In

Video In

VCR DVD

E9770ED_EN.book Page 33 Wednesday, August 3, 2005 6:35 PM