Getting started, Connections, Connecting to a tv – JVC DR-MV2SEU User Manual
Page 17: Connecting to external equipment, Follow steps 1 and 2 above, Coaxial, Av2 (rear)
17
G
ett
ing
S
tarted
EN
Connections
Connecting to a TV
Connect the unit to a TV after considering the
capabilities of your existing equipment.
Before installation, plug off your TV and this
unit.
Using the Scart jack
1
Connect the antenna or cable to the
ANTENNA IN jack of this unit.
2
Connect the ANTENNA OUT jack of
this unit to the Aerial jack of your TV.
Use the supplied RF cable.
3
Connect AV1 (TV) Scart jack of this
unit to the Scart jack of your TV. Use
the supplied Scart cable or a
commercially available Scart / RCA
cable.
Note
• If your TV does not have a Scart jack, use
commercially available Scart adaptor or Scart / RCA
cable to connect. Use only AV1 (TV) or AV2
(DECODER) jack for the VCR output signals of this unit.
Using the S-VIDEO OUT jack and the AUDIO
OUT jacks (only for DVD)
If your TV has an S-Video input jack, use S-Video and
Audio cables to connect.
1
Follow steps 1 and 2 above.
2
Connect S-VIDEO OUT jack of this
unit to the S-Video input jack of your
TV. Use a commercially available
S-Video cable.
3
Connect the AUDIO OUT jacks of this
unit to the analogue Audio input
jacks of your TV. Use a commercially
available Audio cable.
Connecting to External Equipment
This unit has three input terminals, AV1 or AV2 on the
rear panel and AV3 on the front panel. Be sure that all
the units are off before making connections.
Recording from a DVD player, VCR or other
Audio-Video equipment with a Scart output
jack (AV2)
Getting Started
DVD/VCR
AV2(DECODER)
AUDIO
OUT
IN
OUT
L
R
S-VIDEO
OUT
AV1(TV)
DVD
ANTENNA
DIGITAL
AUDIO OUT
COAXIAL
2
3
3
3
1
Cable
Signal
Antenna
RF cable
(not supplied)
RF cable
(supplied)
Scart cable (supplied)
or
Scart/RCA
cable (not
supplied)
To Aerial jack
Audio/Video cable (not supplied)
Scart adaptor
(not supplied)
or
or
Note for a TV with no S-Video input jacks or
Scart jack:
• This unit has no RF modulator, so this type of TV
cannot be used.
DVD/VCR
AV2(DECODER)
AUDIO
OUT
IN
OUT
L
R
S-VIDEO
OUT
AV1(TV)
DVD
ANTENNA
DIGITAL
AUDIO OUT
COAXIAL
AUDIO IN
S-VIDEO IN
S-Video cable
(not supplied)
Audio cable
(not supplied)
DVD/VCR
AV2(DECODER)
AUDIO
OUT
IN
OUT
L
R
S-VIDEO
OUT
AV1(TV)
DVD
ANTENNA
DIGITAL
AUDIO OUT
COAXIAL
AV output jack
(Scart)
Scart cable (supplied)
AV2 (Rear)
E9770ED_EN.book Page 17 Wednesday, August 3, 2005 6:35 PM