JVC BD-X201M - Manual (Page 37)

62
Parameter Possible settings Description
INPUT SELECT [LINE]
Y/C
DV
INPUT [LINE]
YC
dV
MENU
MENU
Setup Menu
SYSTEM MENU Screen
The following table identifies and describes the parameters that may be set using the SYSTEM MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
SYSTEM MENU (1/2) screen
Parameter Possible settings Description
SETUP OFF
[ON]
SETUP oFF
[oN]
TEST SIGNAL [OFF]
ON
TEST S [oFF]
oN
FACTORY [CANCEL]
SETTING EXECUTE
FACTRY [CAN]
EXE
KEYBOARD [ENGLISH]
STYLE FRENCH
ITALIAN
GERMAN
SPANISH
JAPANESE
KboARd [ENG]
FRN
ITL
GER
ESP
JPN
INPUT SELECT MENU Screen
The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
This parameter is used to select the audio and video input signals.
LINE : The composite video signal from the VIDEO LINE IN terminal and the analog
audio signals from the AUDIO IN terminals are to be used.
Y/C : The YC separate signal from the Y/C IN terminal and the analog audio signals
from the AUDIO IN terminals are to be used.
DV : The digital video and audio signals from the DV IN/OUT terminal are to be used.
* The front-panel indicator corresponding to the type of input signal selected on this
screen will light up or start to flash.
Setting of this parameter will not be possible when REMOTE SELECT from the
REMOTE MENU screen has been set to DV(SLAVE), or DV(TRIGGER). DV signals
will be used for input at these times
This button is used to return to the Setup Menu screen.
This parameter is used to indicate whether or not a setup signal is to be added to analog
video (i.e., composite or YC separate) during the recording process. The actual setting depends
on whether the input analog signal contains a setup signal. (NTSC ouly)
OFF : This setting should be made when the input analog signal does not contain
a setup signal.
ON : This setting should be made when the input analog signal contains a setup signal.
This parameter is used to indicate whether or not the color bar output by the DVD
recorder’s internal signal generator is to be displayed.
OFF : The color bar is not displayed and video from the VIDEO LINE IN terminal is
output to the monitor.
ON : The color bar is displayed. Use this setting when the color bar is to be recorded.
This parameter is used to indicate whether or not all setup menu parameters are to
be returned to their default settings.
CANCEL
: Default settings are not to be restored.
EXECUTE : Default settings are to be restored. However, the current set values for
the TV TYPE item on the SYSTEM MENU (2/2) screen will not be erased.
The system must be restarted after this parameter is changed.
This parameter is set when using a USB keyboard, and its purpose is to indicate the
keyboard’s layout (or language) as one of the following.
ENGLISH
FRENCH
ITALIAN
GERMAN
SPANISH
JAPANESE
The system must be restarted after this parameter is changed.
Note
Note
63
TOTAL RECORDING TIME —
— —
∆
SYS2
MENU
MENU
SYSTEM MENU Screen (continued)
Parameter Possible settings Description
PLAY BACK [DVD]
&232C TYPE VTR
232C [dVd]
VTR
For selecting whether to set DVD playback actions and display of a title's elapsed
time /index number to the VTR or DVD mode. Actions via RS-232C control will vary
accordingly with this setting. Please see the following table for details.
This button displays the total time for recording and erasing operations. (xHour xxMin)
This button is used to display the SYSTEM MENU (2/2) screen.
This button is used to return to the Setup Menu screen.
ⅥPlayback
Playback till end point of the last
title.
Index Search
STOP Operation in Stop Mode
(Unfinalized Discs)
ⅥLCD / Onscreen
Elapsed Time Display of a Title
Index Value Display
Searches and stops at the point
that is 3 seconds prior to the end
point.
Accepts index of points that exist
in the disc.
Resume data will not be cleared.
Displays total time as accumulated
from the first title.
Displays total number as
accumulated from the first title.
[Range: 0 - 9801]
Searches and stops at the
beginning of the last title.
Accepts index of points that exist
in the current title.
Resume data will be cleared.
Searches and stops at the
beginning of the last title.
Displays elapsed time of the current
title.
Displays index value of the current
title. [Range: 0 - 99]
Action When Set to VTR When Set to DVD