JVC BD-X201M - Manual (Page 35)

58
Setup Menu
Setting the Setup Menu
Settings made in the setup menus are stored in this DVD recorder’s internal memory and will be retained even when the power is
turned off. It is also possible to return to default settings whenever so required.
In addition to the buttons on the front panel, a keyboard can also be used to perform operations on these menus. The following
section, however, will describe operations performed using the front panel buttons.
Keyboard : Select using the arrow keys (
∞ and √), and confirm the selection using the Enter key.
Setup menu operations are carried out while monitoring the display on the monitor
connected to the VIDEO LINE OUT or Y/C OUT terminal. In addition, setup menu
content also appears on the LCD display.
Ⅵ Stop the DVD recorder.
1. Open the Setup Menu screen.
To do this, press the SET UP button
2. Open the setup menu in which settings are to be modified.
q Use the 6 and 7 buttons to select the required screen.
w Press the SET button
* The EXIT option can be selected to return to the normal screen display.
3. Make the required settings in the setup menu.
q Use the 6 and 7 buttons to select the parameter to be set.
w Press the SET button
● A list of setting values will appear.
e Use the 6 and 7 buttons to select the required value from the list and then
press the SET button.
● The setting value will be modified accordingly.
r Repeat steps q through e until all of the required settings have been
made.
Ⅵ To return to the Setup Menu, select MENU and press the SET button.
Ⅵ To move to the next menu screen, select the † button at the top of the current
screen and press the SET button.
Ⅵ To return to the original menu screen, select either MENU or BACK and press
the SET button.
4. Use either of the following methods to return to the normal screen
display.
Press the SET UP button.
or
Select EXIT from the Setup Menu and press the SET button.
Settings
MENU
SETUP OFF
TEST SIGNAL OFF
FACTORY SETTING EXECUTE
KEYBOARD STYLE ENGLISH
PLAYBACK & 232C TYPE DVD
TOTAL RECORDING TIME 5 Hour 30 Min
SYSTEM MENU (1/2)
Restoring to Default Settings
All settings from the various setup menus can be returned to the corresponding
default settings by setting FACTORY SETTING from the SYSTEM MENU screen
to EXECUTE and by then pressing the SET button.
* The current set values for the TV TYPE item on the SYSTEM MENU (2/2) screen
will not be erased.
BUSY
OPEN/CLOSE
TOP MENU MENU
OPTION DV Y/C LINE
SET UP
SET
EXIT
DISC
INPUT SELECT
SYSTEM
DVD MENU
RECORDER
REMOTE
DISPLAY
CLOCK ADJUST
NETWORK
MENU
CHAPTER CREATION MANUAL
SET INTERVAL Every05Min
AUTO CHAPTER (RECPAUSE) ON
ENCODE QUALITY SP
AUDIO ENCODE DOLBY DIGITAL
RECORDER MENU (1/2)
SET button
Cursor buttons
(
6, 7, 8 and t)
SET UP button
Setup Menu
RECORDER MENU (1/2) screen
Setting list
SYSTEM MENU screen
MENU
CHAPTER CREATION MANUAL
SET INTERVAL
AUTO CHAPTER (RECPAUSE)
ENCODE QUALITY SP
AUDIO ENCODE DOLBY DIGITAL
RECORDER MENU (1/2)
AUTO
59
Setup Menu Configuration
The Setup Menu screen is displayed on both the monitor and LCD display. As shown below, this screen is used to access this DVD
recorder’s setup menus.
MENU
HOST NAME bdx201m
STATIC IP ADDRESS SETTING
255..255.255.0
192.168.0.254
192.168.0.2 IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MAC ADDRESS
NETWORK MENU
99.99.99.99.99
EXIT
DISC
INPUT SELECT
SYSTEM
DVD MENU
RECORDER
REMOTE
DISPLAY
CLOCK ADJUST
NETWORK
MENU
INPUT SELECT LINE
INPUT SELECT MENU
MENU
SETUP ON
TEST SIGNAL OFF
FACTORY SETTING CANCEL
KEYBOARD STYLE ENGLISH
PLAYBACK & 232C TYPE DVD
TOTAL RECORDING TIME 5 Hour 30 Min
SYSTEM MENU (1/2)
MENU
DISPLAY ON
TITLE/CHAPTER/INDEX OFF
RECORDER MODE
OFF
OFF
TIME/DATE
REMAIN OFF
DATE STYLE MM/DD/YY
LCD TITLE+CHAPTER
DISPLAY MENU
MENU
DATE 04/12/04
10:00 TIME
CLOCK ADJUST MENU
MENU
FINALIZE
CANCEL
OFF
CANCEL
OFF
CANCEL DISC FINALIZATION
AUTO FINALIZE
AUTO CANCEL DISC FINALIZ.
DISC MENU
CANCEL
CANCEL
DISC ERASE
DISC ERASE
CANCEL LAST TITLE ERASE
( QUICK )
( FULL )
MENU
CHAPTER CREATION MANUAL
SET INTERVAL Every05Min
RECORDER MENU (1/2)
AUTO CHAPTER (REC PAUSE) ON
ENCODE QUALITY SP
AUDIO ENCODE DOLBY DIGITAL
ASPECT AUTO
INDEX CREATION MANUAL
BACK
AUDIO CHANNEL (DV) 1,2ch † 1,2ch
AUDIO REC VOLUME MODE BOTH
RECORDER MENU (2/2)
BACK
AC IN MODE ON
SYNC SYSTEM AUTO
TV TYPE NTSC
VBID OUT(WIDE) OFF
Y/C TERMINAL MODE S1
OPERATION LOCK OFF
SYSTEM MENU (2/2)
MENU
EDIT MENU DISABLE
STYLE TYPE1
TITLE PATTERN 1
CHAPTER PATTERN 1
THUMBNAIL FORM NORMAL
DVD MENU TYPE
DISC IN ACTION
TITLE END
TOP
TITLE
NEXT TITLE
DVD MENU
MENU
REMOTE SELECT
FOOT SW1
OFF
OFF
OFF
OFF
REC CONTROL
FOOT SW2
232C BAUDRATE 9600
TYPE1 232C PROTOCOL TYPE
REMOTE MENU
Setup Menu ( ☞ Page 60 )
DISC MENU screen ( ☞ Page 61)
SYSTEM MENU (2/2) screen
(
☞ Page 64)
DVD MENU screen ( ☞ Page 65)
SYSTEM MENU (1/2) screen
(
☞ Page 62)
RECORER MENU (1/2) screen
(
☞ Page 67)
RECORER MENU (2/2) screen
(
☞ Page 68)
REMOTE MENU screen ( ☞ Page 69)
DISPLAY MENU screen ( ☞ Page 71)
NETWORK MENU screen ( ☞ Page 72)
CLOCK ADJUST MENU screen
(
☞ Page 72)
INPUT SELECT MENU screen
(
☞ Page 62)