JVC DD-8 - Manual (Page 26)

23
Bas
ic
o
p
era
tions
of disc
/f
ile
pla
y
ba
ck
* For the number button usage, refer to “Using the
number buttons” on page 17.
■ CAUTION
• Slide the remote control mode
selector to [AUDIO].
This part explains playing back the types of discs
shown above.
1
Press [OPEN/CLOSE 0 ] on the
remote control or 0 on the main
unit.
• The disc tray ejects.
2
Place a disc.
• To play back an 8-cm disc, place it on the
inner hollow of the disc tray.
3
Press [DVD/CD 3].
NOTE
• Instead of step 3, you can use the buttons on the
main unit. Repeatedly pressing [SOURCE] can
select the disc as the source, and pressing 3
starts playback.
• A menu screen may appear on the TV screen
after DVD playback starts. In such a case, oper-
ate the menu screen, referring to “Selecting a
track from the menu screen” on page 30.
• If you perform an operation, such as changing
the source quickly or loading an incompatible
disc (refer to pages 49-51), the disc may not be
played back or ejected. In this case, turn off the
main unit and turn it on again by using F on the
main unit.
Number
buttons*
Playing back a disc
Printed surface
Disc tray
Remote control
mode selector
Basic operations of disc/file playback
DD-831[A_Ux]-06.fm Page 23 Friday, October 13, 2006 11:02 AM