John Deere 5083EN - Manual (Page 1368)

CODE
ATTACHMENT
IDENTIFIER
DESCRIPTION
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
RE308214 Fenders, Deluxe Pivoting Front for 1500 Series MFWD - 18.7 In. (480 mm) Wide
For 8130-8530, 825R-83455R.
Recommended use with 12.4 In. (290 mm) to 16.9 In. (420 mm) tire widths.
Compatible with 1500 Series MFWD front axle only.
1,368.00
RE308215 Fenders, Deluxe Pivoting Front for 1500 Series MFWD - 24.4 In. (620 mm) Wide
For 8130-8530, 8225R-8345R.
Recommended use with 18.4 In. (480 mm) to 23.6 In. (600 mm) tire widths.
Compatible with 1500 Series MFWD front axle only.
1,603.00
RE236667 Fenders, Deluxe Pivoting Front for Independent Link Suspension -
18.7 In. (480 mm) Wide
For 8130-8530, 8225R-8345R.
Also order 2 pieces of R186578.
Recommended use with 12.4 In. (290 mm) to 16.9 In. (420 mm) tire widths.
1,368.00
RE236670 Fenders, Deluxe Pivoting Front for Independent Link Suspension -
24.4 In. (620 mm) Wide
For 8130-8530, 8225R-8345R.
Also order 2 pieces of R186578.
Recommended for use with 18.4 In. (480 mm) to 23.6 In. (600 mm) tire widths.
Not for use with front dual tire combinations.
1,603.00
RE236666 Fenders, Deluxe Pivoting Front for MFWD - 18.7 In. (480 mm) Wide
For 8130-8530.
Recommended use with 12.4 In. (290 mm) to 16.9 In. (420 mm) tire widths.
Compatible with 8030 Series Tractors between (s/n 000101 - 007241).
1,329.00
RE236669 Fenders, Deluxe Pivoting Front for MFWD - 24.4 In. (620 mm) Wide
For 8130-8530.
Recommended use with 18.4 In. (480 mm) to 23.6 In. (600 mm) tire widths.
Compatible with 8030 Series Tractors between (s/n 000101 - 007241).
1,329.00
RE253154 Fenders, Extra Width Rear Fender Extensions - 108 In. (2.75 M) Width
For 8130-8530.
For use with 800 mm wide rear tires.
Requires Full Coverage Rear Fenders (RE210326) for installation.
416.00
RE210326 Fenders, Full Coverage Rear 2.55 meter (100 In. width)
For 8120-8520, 8130-8530.
772.00
Hitch and Drawbar:
R177682 Center Link Bracket
Retains the center link when not in use.
For 8020, 8020T, 8030, 8030T, 8130-8530, 8230T-8430T, 8225R-8345R and 8295RT-8345RT
Tractors.
See Parts
AR211154 Drawbar Heavy Duty Support for use with Cat. 4 Drawbar
(11,000 Lb. Vertical Load Capacity)
For 8430, 8530 and 8430T.
With PTO Codes 2418 or 2420 Cat. 4 Drawbar is NOT compatible with 1-3/8 540 rpm PTO.
809.00
RE268625 Drawbar, Ball-type 80 mm Cat. 4
For 8130-8530, 8295R-8345R.
Ball-type drawbar for use when using the DN 345 - Drawn Dry Box Spreader. No other
implements are approved for this drawbar.
3,263.00
AGRICULTURAL PRODUCTS
JOHN DEERE TRACTORS
Attachments for Non-Current 8030/8030T Series Tractors
Continued
16 May 2012 US & Canada
2-Tractors(AFFC)-01600- 2