John Deere OMM141979 J9 - Manual (Page 2)

Introduction
INTRODUCTION
Introduction
Thank You for Purchasing This Product
We appreciate your business and wish you many years of
safe and satisfied use of your machine.
Using Your Operator’s Manual
This manual is an important part of your machine and
should remain with the machine when you sell it.
Reading your operator’s manual will help you and others
avoid personal injury or damage to the machine.
Information given in this manual will provide the operator
with the safest and most effective use of the machine.
Knowing how to operate this machine safely and correctly
will allow you to train others who may operate this machine.
Section in your operator’s manual are placed in a specific
order to help you understand all the safety messages and
learn the controls so you can operate this machine safely.
You can also use this manual to answer any specific
operating or servicing questions. A convenient index
located at the end of this book will help you to find needed
information quickly.
The machine shown in this manual may differ slightly from
your machine, but will be similar enough to help you
understand our instructions.
RIGHT-HAND and LEFT-HAND sides are determined by
facing in the direction the machine will travel when going
forward. When you see a broken line arrow (------>), the
item referred to is hidden from view.
Special Messages
Your manual contains special messages to bring attention
to potential safety concerns, machine damage as well as
helpful operating and servicing information. Please read all
the highlighted information carefully to avoid injury and
machine damage.
NOTE: General information is given throughout the
manual that may help the operator in the operation of
the machine.
c
CAUTION: Avoid injury! !
This symbol and text highlight potential
hazards or death to the operator or bystanders
may occur if the hazards or procedures are
ignored.
IMPORTANT: Avoid damage! ! This text is used to
tell the operator of actions or conditions that might
result in damage to the machine.