Specifications, English – JVC RX-5032VSL User Manual
Page 36
33
English
Specifications
Designs & specifications are subject to change without notice.
Amplifier
Output Power:
At Stereo operation:
Front channels:
100 W* per channel, min. RMS, driven into 8
Ω at 1 kHz with no
more than 0.9% total harmonic distortion. (IEC268-3/DIN)
At Surround operation:
Front channels:
100 W per channel, min. RMS, driven into 8
Ω at 1 kHz with no
more than 0.8% total harmonic distortion.
Center channel:
100 W, min. RMS, driven into 8
Ω at 1 kHz, with no more than
0.8% total harmonic distortion.
Surround channels:
100 W per channel, min. RMS, driven into 8
Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
(* Measured on AC 110 V, 127 V, 220 V, and 240 V)
Audio
Audio Input Sensitivity/Impedance (1 kHz):
CD, TAPE/CDR, VCR, TV SOUND, DVD:
220 mV/47 k
Ω
Audio Input (DIGITAL IN)* :
Coaxial:
DIGITAL 1 (DVD):
0.5 V (p-p)/75
Ω
Optical:
DIGITAL 2 (CD):
–21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
TAPE/CDR, VCR:
220 mV
Signal-to-Noise Ratio (’66 IHF/DIN):
CD, TAPE/CDR, VCR, TV SOUND, DVD:
87 dB/67 dB
Frequency Response (8
Ω):
CD, TAPE/CDR, VCR, TV SOUND, DVD:
20 Hz to 20 kHz (±1 dB)
Tone Control:
Bass (100 Hz):
±10 dB
Treble (10 kHz):
±10 dB
Video
Video Input Sensitivity/Impedance:
Composite video:
DVD, VCR:
1 V (p-p)/75
Ω
Video Output Level/Impedance:
Composite video:
VCR, MONITOR OUT:
1 V (p-p)/75
Ω
Synchronization:
Negative
Signal-to-Noise Ratio:
45 dB
26-34_RX-5032V[US]f
03.2.5, 18:59
33