beautypg.com

Basic operations, English, Selecting different sources for picture and sound – JVC RX-5032VSL User Manual

Page 14: Adjusting the volume, Listening with headphones only, Press speakers on/off on the front panel

background image

11

English

Selecting Different Sources for Picture
and Sound

You can watch the picture from a video component while
listening to sound from another component.

Press one of the audio source selection buttons while
watching the picture from a video component such as the
VCR or DVD player.
• Once you have selected a video source, pictures of the

selected source are sent to the TV until you select another
video source.

On the front panel

From the remote control

Adjusting the Volume

On the front panel

To increase the volume, turn MASTER VOLUME control
clockwise.

To decrease the volume, turn MASTER VOLUME control
counterclockwise.

From the remote control

To increase the volume, press VOLUME +.

To decrease the volume, press VOLUME –.

The volume level can be adjusted within a range of
“0” (minimum) to “50” (maximum).

CAUTION:

Always set the volume to the minimum before starting any source. If
the volume is set at a high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.

SOURCE NAME

FM/AM

TAPE/CDR

CD

TAPE/CDR

CD

DVD

FM/AM

TV SOUND

VCR

ANALOG

/DIGITAL

Listening with Headphones Only

You must turn off the speakers when you listen with
headphones.

1

Press SPEAKERS ON/OFF on the front
panel.

“HEADPHONE” appears on the display for a while.
The SPK indicator goes off and the H.PHONE indicator
lights up.

This cancels the Surround/DSP modes currently selected
and activates the HEADPHONE mode (see below).

2

Connect a pair of headphones to the
PHONES jack on the front panel

.

HEADPHONE mode
When using the headphones, the following signals are sent
to the headphones regardless of your speaker setting:
–For 2 channel sources, the front left and right channel

signals are sent directly to the headphones.

–For multi-channel sources, the front left/right, center, and

surround left/right channel signals are down-mixed and
then sent to the headphones.
You can enjoy multi-channel sound sources using the
headphones.

Note:

While in the HEADPHONE mode, you cannot use any Surround/DSP
modes (see pages 22 to 25).

Remote

NOT

Basic Operations

MUTING

VOLUME +/–

Front panel

Remote control

DIMMER

DIMMER

SLEEP

Audio source

selection buttons

Audio source
selection buttons

SPEAKERS
ON/OFF

PHONES jack

MASTER VOLUME
control

RX–5032V

AUDIO/VIDEO CONTROL RECEIVER

10

0

10

TA/NEWS/INFO

DISPLAY MODE

10-15_RX-5032V[US]f

03.2.5, 18:58

11