JVC RX-5032VSL - Manual (Page 19)

16
English
Turning Off the Subwoofer
When the subwoofer is set to “YES” (see page 13), you can
choose to turn off subwoofer output.
Press SUBWOOFER OUT ON/OFF on the front panel to
turn off the subwoofer.
“SUBWOOFER OFF” appears on the display for a while and
the
S.WFR indicator goes off.
The subwoofer sound comes out of the front speakers.
To turn on the subwoofer, press the button again.
Notes:
• This button does not work when the subwoofer is set to “NO” (see
page 13). In this case, “NO SUBWOOFER” will appear on the
display for a while.
• You cannot turn off subwoofer output when the front speaker size is
set to “SMALL.”
• When you change the subwoofer setting from “NO” to “YES,”
subwoofer output is automatically turned on.
Attenuating the Input Signal
When the input level of the analog source is too high, the
sound will be distorted. If this happens, you need to attenuate
the input signal level to prevent the distortion.
Once this has been adjusted, this receiver memorizes the
adjustment for each source.
Press and hold INPUT ATT on the front panel so that the
INPUT ATT indicator lights up on the display.
• Each time you press and hold the button, the Input
Attenuator mode turns on (“INPUT ATT ON”) or off (“INPUT
NORMAL”).
Sound Adjustments
SUBWOOFER
OUT ON/OFF
INPUT ATT
Remote
NOT
Remote
NOT
Front panel
DIGITAL AUTO SPK ONE TOUCH OPERATION BASS BOOST PRO LOGIC DSP H.PHONE AUTO MUTING TUNED STEREO TA NEWS INFO VOLUME INPUT ATT EON RDS SLEEP
CH–
1 2 ANALOG L LINEAR PCM DIGITAL
C R S.WFR LFE LS RS S
RX–5032V AUDIO/VIDEO CONTROL RECEIVER
16-21_RX-5032V[US]f 03.2.5, 18:58 16