Zoom function – JVC AV28CH1EU User Manual
Page 13

Remote control buttons and functions
11
ENGLISH
AV32/28X25EU / AV32/28H20EU / AV28CH1EU / LCT1142-001A-U / English
• You can choose a video input signal
from the S-VIDEO signal (Y/C signal) 
and regular video signal (composite 
signal). For details, see “S-IN (S-
VIDEO input)” on page 22.
• If you do not have a clear picture or no
colour appears, change the colour 
system manually. See “COLOUR 
SYSTEM” on page 20.
• If you choose an EXT terminal with no
input signal, the EXT terminal number 
becomes fixed on the screen.
• This TV set has a function which can
automatically change over the input 
according to a special signal output 
from an external device. (The EXT-4 
terminal does not support it.)
To return to a TV channel:
Press the b button, the 6 buttons or the 
Number buttons.
To use the Programme number PR 0 
(AV):
When the TV and VCR are connected only 
by the Aerial cable, choosing the Programme 
number PR 0 (AV) allows you to view 
images from the VCR. Set the VCR RF 
channel to the Programme number PR 0 
(AV) manually. For details, see “EDIT/
MANUAL” on page 28.
Pressing the o button changes the 
choice as follows:
• The VCR RF channel is sent as the RF
signal from the VCR.
• Also refer to your VCR instruction
manual.
ZOOM function
You can change the screen size according to 
the picture aspect ratio. Choose the optimum 
one from the following ZOOM modes.
AUTO:
For any picture format except Normal Picture 
(4:3 Aspect Ratio), the picture will be 
automatically displayed in the optimum 
screen size.
For Normal Picture (4:3 Aspect Ratio), the 
picture displayed in accordance with the 
ZOOM mode set on the 4:3 AUTO ASPECT 
menu. For details, see “4:3 AUTO ASPECT” 
on page 20.
• AUTO may not function properly with
poor signal quality. In this case, choose an
optimum ZOOM mode manually.
• This TV supports WSS (wide-screen
signals). When broadcasts with WSS are 
received with the ZOOM mode set at 
AUTO, the most suitable ZOOM mode is 
automatically chosen according to the 
WSS received.
REGULAR:
Use to view a normal picture (4:3 aspect 
ratio) as its original size is.
PANORAMIC:
This mode stretches the left and right sides of 
a normal picture (4:3 Aspect Ratio) to fill the 
screen, without making the picture appear 
unnatural.
• The top and bottom of the picture are
slightly cut off.
EXT-1
PR 0
EXT-4
EXT-2
EXT-3
TV mode
EXT modes
Programme
numbers
PR 1 – PR 99
AV32&28H20EU_Eng.fm Page 11 Wednesday, February 20, 2002 2:04 PM
