JVC DD-3 - Manual (Page 78)

13
English
Set
ting up t
h
e IP a
ddre
s
s
6
Confirm the values displayed in
“IP address:” and “Subnet mask:”.
Example:
Fill out the blank column with the values.
(The values are to be used in step 8 on page
15.)
7
Click [Cancel].
The dialog box is closed.
You have finished confirming the IP address of the
computer.
This part explains the procedure for setting up the
IP address of the main unit manually.
You can skip this part when the main unit and the
computer are connected to a router using a DHCP
function.
NOTE
• Before assigning the IP address to the main unit,
press [NETWORK 3] to select the connected
computer as the source. “NETWORK SETUP”
on the preference screen is disabled when
another source is selected.
(On the remote control)
1
Slide the remote con-
trol mode selector to
[AUDIO].
IP address . . .
Subnet mask . . .
Assigning the IP address to
the main unit
Number
buttons
Remote control
mode selector
DD-83[J].book Page 13 Thursday, September 28, 2006 9:16 AM