beautypg.com

Tuner operations, Manual tuning, Preset tuning – JVC TH-S2 User Manual

Page 38

background image

35

Tuner operations

IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to

AUDIO.

2 Press FM/AM.

1

Press FM/AM repeatedly to select the
band.

Example:
When the system is tuned in to 810 kHz.

2

Press TUNING 9/( repeatedly until
you find the frequency you want.

When you hold down the button until the system starts
searching for stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.

NOTE

• When a station of sufficient signal strength is tuned in, the TUNED

indicator lights on the display window.

• When an FM stereo program is received, the ST indicator lights on the

display window.

Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset 30 FM and 15 AM stations.

7

To preset the stations

1

Tune in the station you want to preset.

• If you want to store the FM reception mode for an FM

station, select the reception mode you want. See “Selecting
the FM reception mode”. (See page 36.)

Example:
When the system is tuned in to 103.5 MHz.

2

Press MEMORY.

While “– –” are flashing:

3

Press number button(s) (1-10, +10) to
select a preset number you want.

• For details on using the number buttons, see “How to use the

number buttons”. (See page 18.).

Example:
When the preset channel 1 is selected.

If the setting is cancelled before you finish, start from step 2
again.

While the selected number is flashing:

4

Press MEMORY.

The selected number stops flashing.
The station is assigned to the selected preset number.
If the setting is cancelled before you finish, start from step 2
again.

5

Repeat steps 1 to 4.

• Storing a new station to a used number erases the previously

stored one.

7

To tune in to a preset station

1

Press FM/AM repeatedly to select FM or
AM.

2

Press number button(s) (1-10, +10) to
select a preset number.

• For details on using the number buttons, see “How to use the

number buttons”. (See page 18.).

The buttons described below are used on pages 35 and
36.

Manual tuning

AUDIO

Number buttons

Remote control
mode selector

8 1 0 k

Preset tuning

TH-S3[C].book Page 35 Monday, April 12, 2004 11:20 AM

This manual is related to the following products: