JVC TH-M301 - Manual (Page 45)

42
Tuner operations
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
1
Press FM/AM repeatedly to select the
band.
Example:
When the system is tuned in to 810 kHz.
2
Press TUNING 9/( repeatedly until
you find the frequency you want.
When you hold down the button until the system starts
searching for stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.
NOTE
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights on the display window.
• When an FM stereo program is received, the ST indicator lights on the
display window.
The buttons described below are used on pages 42 to 43.
Number buttons
Remote control
mode selector
Manual tuning
8 1 0 k