John Deere 624J - Manual (Page 18)

PAGES
18–19
Standard Z-Bar Information with
Quick-Coupler and Construction Fork
444J
Tine Length 48 in. (1220 mm) 60 in. (1525 mm)
Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . 24 ft. 4 in. (7407 mm) 25 ft. 4 in. (7710 mm)
Tipping Load, Straight (fork level, load
centered forward 24 in. [610 mm]
on 48-in. [1220 mm] tine and 30 in.
[762 mm] on 60-in. [1525 mm] tine) . . . . . 11,449 lb. (5193 kg)
10,759 lb. (4880 kg)
Tipping Load, 40-Degree Full Turn (fork
level, load centered forward 24 in.
[610 mm] on 48-in. [1220 mm]
and 30 in. [762 mm] on 60-in. tine
[1525 mm] tine) . . . . . . . . . . . . . . . . . . . . 9,739 lb. (4418 kg)
9,136 lb. (4144 kg)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . 22,626 lb. (10 261 kg) 22,727 lb. (10 307 kg)
High-Lift Z-Bar Information with Pin-On-Type Bucket
General Purpose General Purpose
Bucket Type/Size w/Bolt-On Edge w/Bolt-On Edge
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . . 2.5 cu. yd. (1.9 m 3 ) 2.0 cu. yd. (1.5 m 3 )
Capacity, Struck SAE . . . . . . . . . . . . . . . . . . . . 2.1 cu. yd. (1.6 m 3 ) 1.6 cu. yd. (1.2 m 3 )
Bucket Weight . . . . . . . . . . . . . . . . . . . . . . . . . 1,973 lb. (895 kg) 1,827 lb. (829 kg)
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . . 100.4 in. (2550 mm) 100.4 in. (2550 mm)
Breakout Force, SAE J732C . . . . . . . . . . . . . . . 16,655 lb. (7555 kg) 18,946 lb. (8594 kg)
Tipping Load, Straight . . . . . . . . . . . . . . . . . . . 14,995 lb. (6802 kg) 15,346 lb. (6961 kg)
Tipping Load, 40-Degree Full Turn, SAE. . . . . . 12,736 lb. (5777 kg) 13,055 lb. (5922 kg)
Reach, 45-Degree Dump, 7-ft. (2.13 m)
Clearance . . . . . . . . . . . . . . . . . . . . . . . . . 69.3 in. (1759 mm) 67.6 in. (1715 mm)
Reach, 45-Degree Dump, Full Height. . . . . . . . 41.3 in. (1050 mm) 38.3 in. (972 mm)
Dump Clearance, 45 Degree, Full Height . . . . . 120.1 in. (3052 mm) 123.3 in. (3130 mm)
Overall Length, Bucket on Ground . . . . . . . . . . 23 ft. 5 in. (7133 mm) 23 ft. 0 in. (7015 mm)
Loader Clearance Circle, Bucket In Carry
Position . . . . . . . . . . . . . . . . . . . . . . . . . . 37 ft. 5 in. (11 401 mm) 37 ft. 1 in. (11 306 mm)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . 22,877 lb. (10 377 kg) 22,731 lb. (10 311 kg)
Loader operating information is based on machine with standard equipment; cab; rear cast bumper/counterweight; 20.5R25 tires; ROPS cab; 175-lb. (79 kg) operator; and full fuel tank. This
information is affected by tire size, ballast, and different attachments.
Adjustments to Operating Weights for High-Lift Z-Bar with Pin-On-Type Buckets or Quick-Coupler and Hook-On-Type Buckets
Adjustments to operating weights and tipping loads for 2.5-cu.-yd. (1.9 m 3 ) general-purpose bucket with bolt-on cutting edge
Add (+) or deduct (–) lb. (kg) as indicated for Tipping Load, 40-
loaders with three-piece rims and Operating Weight Tipping Load, Straight Degree Full Turn, SAE
17.5R25 L-3 tires . . . . . . . . . . . . . . . . . . . . . . 0 lb. (0 kg) 0 lb. (0 kg) 0 lb. (0 kg)
17.5R25 L-2 tires . . . . . . . . . . . . . . . . . . . . . . – 228 lb. (– 104 kg) – 131 lb. (– 60 kg) – 112 lb. (– 51 kg)
17.5-25 L-2 tires* . . . . . . . . . . . . . . . . . . . . . . – 544 lb. (– 247 kg) – 313 lb. (– 142 kg) – 267 lb. (– 121 kg)
17.5-25 L-2 tires. . . . . . . . . . . . . . . . . . . . . . . – 496 lb. (– 225 kg) – 285 lb. (– 129 kg) – 243 lb. (– 110 kg)
17.5-25 L-3 tires. . . . . . . . . . . . . . . . . . . . . . . – 460 lb. (– 209 kg) – 265 lb. (– 120 kg) – 225 lb. (– 102 kg)
20.5R25 L-2 tires** . . . . . . . . . . . . . . . . . . . . . + 412 lb. (+ 187 kg) + 237 lb. (+ 108 kg) + 202 lb. (+ 92 kg)
20.5-25 L-2 tires** . . . . . . . . . . . . . . . . . . . . . + 92 lb. (+ 42 kg) + 53 lb. (+ 24 kg) + 45 lb. (+ 21 kg)
550/65R25 L-3 tires** . . . . . . . . . . . . . . . . . . . + 1,316 lb. (+ 598 kg) + 757 lb. (+ 344 kg) + 645 lb. (+ 293 kg)
CaCl
2
in 17.5-25 rear tires** . . . . . . . . . . . . . . + 1,179 lb. (+ 535 kg) + 1,356 lb. (+ 615 kg) + 1,155 lb. (+ 524 kg)
Optional rear cast bumper/counterweight
(removed) . . . . . . . . . . . . . . . . . . . . . . . . . N/A N/A N/A
*Equipped with one-piece rims.
**CaCl
2
not recommended with 20.5R25, 20.5-25, and 550/65R25 tires.
Vertis QCA
1300 19th Street, Suite 200
East Moline, IL 61244
Cyan Magenta Yellow Black DKAJULDR Page 18 D
DKAJULDR_SPECS 10/24/06 10:47 AM Page 18