JVC GR-DVL315 - Manual (Page 53)

EN
53
CONTINUED ON NEXT PAGE
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
9. The image taken using
Snapshot is too dark.
10. The image taken using
Snapshot is too bright.
11. Digital Zoom does not
work.
12. The Black & White Fader
does not work.
13. The Dissolve function does
not work.
14. The Picture Wipe and
Dissolve functions do not
work.
9. •Shooting was performed
under backlit conditions.
10. •The subject is too bright.
11. •10X optical zoom is
selected.
•“PROGRAM AE” is set to
“VIDEO ECHO” in the
Menu Screen.
•Picture Wipe or Dissolve are
being used in a scene
transition.
12. •The Sepia or Monotone
mode is activated.
13. •The Sepia, Monotone or
Slow Shutter mode of
Program AE with special
effects is activated.
•“WIDE MODE” is set to
“SQUEEZE” in the Menu
Screen.
•The previously selected
mode of Program AE with
special effects was changed
after the last selected scene
for editing was registered.
14. •The last selected editing
scene is ending.
•At the end of the last
selected scene for editing,
the Power Switch was set to
“OFF”.
•The power is off.
9. •Press the BACKLIGHT
Button (
੬
pg. 29).
10. •Set “PROGRAM AE” to
“SPOTLIGHT” in the Menu
Screen (
੬
pg. 24).
11. •Set “ZOOM” to “40X” or
“400X” in the Menu Screen
(
੬
pg. 32).
•Disengage the “VIDEO
ECHO” mode (
੬
pg. 16,
25).
•Wait until the Picture Wipe
or Dissolve effects are
completed (
੬
pg. 16, 26).
12. •Turn off Sepia and Mono-
tone (
੬
pg. 24, 26).
13. •Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene
transition (
੬
pg. 24, 26).
•Set “WIDE MODE” to
“CINEMA” or “OFF” mode
(
੬
pg. 33).
•Make sure you have
selected the mode of
Program AE with special
effects you want before
starting editing (
੬
pg. 24,
26).
14. •Select Picture Wipe or
Dissolve before beginning
recording. The effects are
then automatically activated
(
੬
pg. 26).
•Do not turn off the
camcorder’s power after
setting Edit-In and Edit-Out
points, as they will all be
erased (
੬
pg. 26).
•The camcorder automati-
cally shuts off after 5
minutes have elapsed in the
Record-Standby mode.
Make sure you continue
operations within 5 minutes
after engaging Record-
Standby mode (
੬
pg. 26).