JVC GR-DVL315 - Manual (Page 39)

EN
39
USING THE REMOTE CONTROL UNIT
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or when
the remote sensor is directly exposed to sunlight
or powerful lighting.
Remote sensor
A
B
1
1
2
3
1
2
3
1
1 1
2 2
3 3
+
+
–
–
Installing The Battery
(RM-V700U, optional)
The remote control uses one lithium battery (CR2025).
1 There are 2 ways to pull the battery holder out
of the RM-V700U.
: Pull out the battery holder while sliding the
lock hole.
: Pinch the release tab and pull out the
battery holder.
2
Insert the battery in the holder, and be sure to
have the “+” mark visible.
3
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
in the RM-V700U instruction manual.
Installing The Batteries
(RM-V715U, provided)
The remote control uses two “AAA (R03)” size
batteries. See “General Battery Precautions”
(
੬
pg. 63).
1
Open the battery compartment cover as
illustrated.
2
Insert two “AAA (R03)” size batteries in the
correct direction.
3
Replace the battery compartment cover.
Lock hole
Knob
30
°
30
°
Transmitted beam
effective area
5 m (16 ft)
The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback
functions possible.
If you want to perform Random Assemble Editing (
੬
pgs. 42 – 46), use the optional RM-V700U remote
control.