beautypg.com

Snapshot (for tape recording), For recording, Cont.) – JVC GR-DVL160 User Manual

Page 42

background image

42

EN

Snapshot (For Tape Recording)

This feature lets you record still images that look like
photographs onto a tape.

SNAPSHOT MODE SELECTION

1

Set the VIDEO/MEMORY Switch to “VIDEO”

(GR-DVL767/DVL367/DVL365 only), then set the
Power Switch to “

MANUAL

” while pressing down the

Lock Button located on the switch.

2

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

3

Rotate the MENU/BRIGHT wheel to select “

CAMERA”. Press it and the CAMERA Menu appears.

4

Rotate the MENU/BRIGHT wheel to select

“SNAP MODE”, then press it.

5

Rotate the MENU/BRIGHT wheel to select the

desired Snapshot mode, then press it.
Rotate the MENU/BRIGHT wheel to select

RETURN” and press it twice. The Menu Screen

closes.

SNAPSHOT RECORDING

1

Press SNAPSHOT. “PHOTO” appears while the

snapshot is being taken.

If you press during Record-Standby . . .

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the camcorder re-enters
the Record-Standby mode.

If you press during Recording . . .

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the normal recording
resumes.

• Regardless of the Power Switch position (“

AUTO

” or

MANUAL

”), Snapshot recording takes place using the

selected Snapshot mode.

Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar
to serial photography. (Interval between still images:
approx. 1 second)

NOTES:

To remove the shutter sound,

“BEEP” on pg. 46, 48.

If Snapshot recording is not possible, “PHOTO” blinks
when SNAPSHOT is pressed.

If Programme AE with special effects (

pg. 38) is

engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such
a case, the icon blinks.

If SNAPSHOT is pressed when “DIS” is set to “ON”
(

pg. 47), the Stabiliser will be disabled.

The Motor Drive mode is disabled when “REC
SELECT” is set to “

/

” in the Menu Screen

(

pg. 49).

If “REC SELECT” is set to “

/

” in the DSC

Menu Screen, still images are recorded on the memory
card as well (640 X 480 pixels).

During tape playback as well, all snapshot modes are
available when “

COPY” is set to “OFF” in the

Menu Screen (

pg. 50). However, the shutter sound

is not heard.

During Snapshot recording, the image displayed in the
viewfinder may be partially missing. However, there is
no effect in the recorded image.

When a cable is connected to the AV connector, the
shutter sound is not heard from the speaker, however it
is recorded onto the tape.

FOR RECORDING

(cont.)

SNAP MODE

P I N–UP
FRAME

FUL L

SNAPSHOT Button

Lock Button

VIDEO/MEMORY Switch
(GR-DVL767/DVL367/
DVL365 only; open the
LCD monitor to access
this switch.)

Display

Menu Screen

There is the sound effect of a shutter closing.

FULL
Snapshot mode
with no frame

FRAME
Snapshot mode
with frame

PIN-UP
Pin-Up mode

Power Switch

GR-DVL767/DVL367/
DVL365 only

This manual is related to the following products: