Tape recording, Cont.), Zooming – JVC GR-DVL160 User Manual
Page 18
18
EN
TAPE RECORDING
(cont.)
FEATURE:
Zooming
PURPOSE:
To produce the zoom in/out effect, or an instanta-
neous change in image magnification.
OPERATION:
Zoom In
Slide the Power Zoom Lever towards “T”.
Zoom Out
Slide the Power Zoom Lever towards “W”.
Ⅲ
The further you slide the Power Zoom Lever, the
quicker the zoom action.
NOTES:
●
Focusing may become unstable during Zooming. In
this case, set the zoom while in Record-Standby,
lock the focus by using the manual focus
(
੬
pg. 43), then zoom in or out in Record mode.
●
Zooming is possible to a maximum of 500X, or it
can be switched to 10X magnification using the
optical zoom (
੬
pg. 47).
●
Zoom magnification of over 10X is done through
Digital image processing, and is therefore called
Digital Zoom.
●
During Digital zoom, the quality of image may
suffer.
●
Digital zoom cannot be used when the VIDEO/
MEMORY Switch is set to “MEMORY” (
੬
pg. 17).
●
Macro shooting (as close as approx. 5 cm to the
subject) is possible when the Power Zoom Lever is
set all the way to “W”. Also see “TELE MACRO” in
the Menu Screen on page 48.
1x W
T
0
1 x W
T
0
1 x W
T
0
2 x W
T
0
4 x W
T
Zoom in (T: Telephoto)
Zoom out (W: Wide angle)
Power Zoom Lever
Zoom display
Approximate zoom ratio
Digital zoom zone
10X (optical)
zoom zone