JVC GVT0141-003A - Manual (Page 58)

Operating external components with the remote control
12
7 To set the manufacturer’s code
1
Slide the remote control mode selector
to VCR.
2
Press and hold VCR.
Keep the button pressed until step 4 is finished.
3
Press ENTER.
4
Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Panasonic VCR:
Press 1, then 7.
For an Philips VCR:
Press 0, then 9.
5
Release VCR.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to operate a VCR;
Set the remote control mode selector to VCR.
The following buttons are available:
VCR:Turns VCR on and off.
3 (play button):Starts playback.
7:Stops operation.
8:Pauses playback.
¡
:Fast forwards video tape.
1:Rewinds video tape.
REC:Press this button together with
3 (play button) to start
recording or together with 8 to pause recording.
CHANNEL +/–:Changes the TV channels on the VCR.
Operating the VCR
Manufacturer Code Manufacturer Code
JVC 01, 02, 03 Philips 09
Emerson 11, 26 RCA 05, 06
Fisher 29 Samsung 24
Funai 10, 14-16 Sanyo 21-23
Gold Star 12 Sharp 27, 28
Hitachi 04 Shintom 30
Mitsubishi 13 Sony 18-20
NEC 25 Zenith 08
Panasonic 07, 17
VCR
See page 11 for button locations.
TH-S1[UXUG]-1.book Page 12 Wednesday, July 21, 2004 10:29 AM