John Lewis JLDWW 1203 - Manual (Page 3)

3
Maintenance and cleaning
• All filters must be checked and cleaned on a regular basis
- dirty filters will degrade the wash performance of the
dishwasher. For information on maintaining and cleaning
your dishwasher see page 25 of this Instruction manual.
Service
• This product should be serviced by an authorised service
engineer, and only genuine spare parts should be used.
See page 29 for details.
2
Ecological hints
To save water and energy and help protect the environ-
ment, we recommend that you follow these hints:
• Ensure that the water softener is correctly adjusted.
• Do not pre-wash under running water.
• Select the wash programme to suit the nature and degree
of the soiling on the dishes.
• Do not use more detergent, dishwasher salt and rinse aid
than is recommended in these operating instructions and
by the manufacturer of the respective product.
• Delay start: When possible programme your dishwash-
er to run over night, to enable, for example, the use of
economical overnight electricity tariffs.
• Automatic Wash Programme: This machine is fitted
with a turbidity sensor which intelligently adjusts the tem-
perature and rinsing cycles during the wash programme,
depending on the degree of soiling on the dishes. This
helps to reduce energy and water consumption on lightly
soiled loads.
2
Environmental Information
Dispose of the dishwasher packaging material correctly.
All packaging materials can be recycled.
Plastic parts are marked with standard international abbre-
viations:
>PE< for polyethylene, e.g. sheet wrapping material.
>PS< for polystyrene, e.g. padding material (always CFC-
free).
>POM< for polyoxymethylene, e.g. plastic clips.
Cardboard packaging is manufactured from recycled paper
and should be deposited in the waste paper collection for
recycling. As and when you cease to use your dishwasher
and withdraw it from service, your should render it unserv-
iceable before having it disposed of.
For the disposing of the appliance please take it to a recy-
cling centre or to your dealer who may, for a small contri-
bution to the costs, dispose it for you.
1
A cut off plug inserted into a 13 amp socket is a seri-
ous safety (shock) hazard. Please ensure the cut off
plug is disposed of safely.
The symbol
W
on the product or on its packaging indi-
cates that this product should not be treated as normal
household waste. Instead it shall be handed over to the ap-
plicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative conse-
quences for the environment and human health which could
otherwise be caused by inappropriate waste handling of this
product.
For more detailed information about recycling of this prod-
uct, please contact your local city office, your household
waste disposal service or the shop where you purchased
the product.