John Lewis JLDWW 1203 - Manual (Page 11)

11
The Control Panel
1. On/Off indicator light
2. On/Off button
3. Function buttons
In addition to the dishwashing programme selected, the fol-
lowing functions can also be set with the help of these but-
tons:
– the setting of the water softener,
– activation/deactivation of the rinse aid dispenser,
– the cancelling of a programme in progress.
4. Programme selection buttons
The selection of a washing programme occurs by pressing
one of these buttons (see "Washing programmes" chart on
page 22).
5.The digital display indicates:
– the level of hardness to which the water softener is set,
– if the rinse aid dispenser is activated/deactivated,
– the approximate remaining time of the running pro-
gramme,
– the end of the programme (a zero will appear in the digit-
al display),
– the countdown of the delay start,
– fault codes concerning malfunction of the dishwasher.
6. Programme time indicator
light
Illuminates with a back light when a washing programme has
been set and remains illuminated until the appliance is
switched off. When delay start has been set, this indicator
light turns off and will illuminate once the countdown has
elapsed and the washing programme has started.
7. Programme phase indicator
lights
As soon as you select a washing programme, the phase indi-
cator lights foreseen for that programme will start flashing.
As the programme starts, the phase indicator lights will turn
off except for the indicator light of the phase in progress
which will remain lit with a static light.
8 7 6 5 1
2 4
9 10 11
3
1 2 3 4
Washing:
illuminates when the washing and rins-
ing phases are running.
Drying:
illuminates when the drying phase is
running.
End of cycle
illuminates when the washing pro-
gramme has ended.